Table of Contents
Advertisement
Belmont / Corbin Fire Table
Product Code: PRM-OUTD-BEL-FS-FT(02416)/MD-OUTD-2444-FS-FT(02456)
DANGER:
This appliance can produce carbon
monoxide which has no odor.
Using it in an enclosed space can kill
you.
Never use this appliance in an
enclosed space such as a camper,
tent, car or home.
CARBON MONOXIDE HARZARD
Advertisement
Table of Contents
Summary of Contents for Abbyson Belmont Fire Table
- Page 1 Belmont / Corbin Fire Table Product Code: PRM-OUTD-BEL-FS-FT(02416)/MD-OUTD-2444-FS-FT(02456) CARBON MONOXIDE HARZARD DANGER: This appliance can produce carbon monoxide which has no odor. Using it in an enclosed space can kill you. Never use this appliance in an enclosed space such as a camper, tent, car or home.
- Page 2 Date of Purchase : Thank you for your purchase Thank you for your purchase! We are pleased that you have chosen Abbyson living for your outdoor furniture purchase. We hope that you enjoy the unmatched quality, comfort, and style of your new patio set. Every piece is meticulously considered all the way down to the smallest details, exclusively for you, by our world class design team.
-
Page 3: Safety Information
Safety Information DANGER: If the information in this manual is not followed exactly, a fire or explosion may result, WARNING: Do not use for cooking. causing property damage, personal injury, or loss of life. Save this manual for future reference. WARNING: Do not operate, light or use this appliance within 10 feet of walls or structures. - Page 4 Safety Information WARNING: Clearances to Combustible Construction: • Sidewalls: 60” (1.5 m) from edge of table top. • Ceiling: free of obstruction. WARNING: LP gas tank needed to operate. Only • Flooring: 0” – Can be installed on deck, slab, tanks marked "Propane"...
- Page 5 Safety Information SET UP YOUR FURNITURE PROPERLY Ensure that all parts are assembled properly and fully tightened as per □ the instructions. EXAMINE YOUR FURNITURE Examine occasionally to ensure that there are no loose parts. If loose □ parts are found, they must be retightened fully before additional use. INSTALLATION MEETS REQUIREMENT The installation must conform with local codes, or in the absence of local □...
-
Page 6: Warranty
Warranty WHAT IS NOT COVERED This warranty excludes: furniture used for commercial use, contract or □ other non-residential purposes, freight damage, furniture damaged by acts of nature, abuse or lack of proper care, vandalism or improper assembly. Discoloration or fading of straps or f abric or finish as a result of chemicals or spills is not covered. -
Page 7: Pre-Assembly
Pre-Assembly PLANNING ASSEMBLY To prevent damage, place all parts on a soft surface during assembly. Remove all protective caps before beginning assembly. It takes about 40 minutes for one person to complete the assembly. Part Description Quantity Specifications Table Top 1 pcs Table Base 1 pcs... - Page 8 Assembly Put the fire glass (B) into top of table frame (A) Cover the pot cover (C)
-
Page 9: Operation
Operation Connect and disconnect the LP Gas Tank Connect: Open the door on the table base and place the LP gas tank into the round tank holder. Connect the regular to tank by turning the knob clockwise until it stops. Disconnect: Before disconnecting make sure the LP gas tank value is “CLOSED”. -
Page 10: Shutdown Instructions
Operation (continued) Lighting the fire pit 1. Push and slowly turn the control knob to the LOW position . 2. Hold ignitor to light the burner, release control knob after 5 seconds. 3. Observe the flame height when lit. Flame should be 3 to 13 inches high . -
Page 11: Maintenance
Maintenance Air flow through the fire pit must remain unobstructed. Keep ventilation openings, controls, burner, and air passages clean and clear of debris. Signs of possible blockage include the following: Gas odor with extreme yellow tipping of flame. Fire pit does not reach the desired temperature. Fire pit glow is excessively uneven. -
Page 12: Troubleshooting
NOTE: Wait until the fire pit is cool before covering. During periods of extended inactivity or when transporting • Turn the control knob OFF. • Disconnect the LP source, and move it to a secure, well-ventilated location outdoors. • Store the fire pit upright in an area sheltered from direct contact with inclement weather (such as rain, sleet, hail, snow, dust and debris).