Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LITEWERKS LITE BLOX LB14 Series
Summary of Contents for LITEWERKS LITE BLOX LB14 Series
- Page 1 INSTRUCTION MANUAL ENGLISH V1.1...
- Page 2 1. Safety guidelines 4. Installation 1.1. General 4.1. General information 1.2 Advices 4.2. Unpacking 1.3. Disposal 4.3. First use 1.4. Safety symbols 4.3.1. Placement 1.5. Product labelling 4.3.2. Connecting wires 4.3.3. Connecting charger 2. Introduction 4.4. Disconnecting 2.1. Product description 2.2.
- Page 3 5.6.4. Charts 5.6.5. Telemetry data 6. Maintenance 6.1. General information 6.2. Inspection 6.3. Cleaning 7. Storage 8. Transportation 9. Disposal & recycling 10. Troubleshooting 11. Warranty and liability L I T E W E R K S G M B H | + 4 9 ( 0 ) 7 5 3 3 / 9 9 2 9 0 0 0 | I N F O @ L I T E B L O X .
-
Page 4: Safety Guideline
SAFETY GUIDELINE L I T E W E R K S G M B H | + 4 9 ( 0 ) 7 5 3 3 / 9 9 2 9 0 0 0 | I N F O @ L I T E B L O X . D E... - Page 5 ADVICES GENERAL Please pay close attention to the following advices in order to ensure an immaculate ATTENTION! Please read the following instructions carefully. operation at any time for maximum product life: • Refer to this manual for appropriate installation, maintenace & charging. This manual is an extension to the printed DIN A6 flyer for „startup &...
-
Page 6: Product Labeling
PRODUCT LABELING DISPOSAL Please note that Li-ion batteries have to be treated differently Dispose the Li-ion battery in accordance with local, state and federal laws from conventional lead-acid batteries. Therefore, make sure to pay and regulations. Batteries may be returned to the manufacturer. close attention to the specifications &... - Page 7 INTRO- DUCTION L I T E W E R K S G M B H | + 4 9 ( 0 ) 7 5 3 3 / 9 9 2 9 0 0 0 | I N F O @ L I T E B L O X . D E...
-
Page 8: Product Description
PRODUCT DESCRIPTION INTENDED USE Our LBXXXX(MS) series Li-ion battery is only to be used as a power source Our LBXXXX(MS) high performance battery series has been developed extensively over the past 6 years for maximum performance, reliability and for starting combustion engines, whit a 12V board net, backed by common safety. -
Page 9: Glossary Of Terminology
GLOSSARY OF TERMINOLOGY I B S - - > I n t e l l i g e n t B a t t e r y m a n a g e m e n t S y s t e m S O C - - >... -
Page 10: Product Specifications
PRODUCT SPECI- FICATIONS L I T E W E R K S G M B H | + 4 9 ( 0 ) 7 5 3 3 / 9 9 2 9 0 0 0 | I N F O @ L I T E B L O X . D E... -
Page 11: Technical Specifications
TECHNICAL SPECIFICATIONS 3 . 1 . 1 3 . 1 . 2 ELECTRICAL MECHANICAL LB14XX(MS) LB20XX(MS) LB28XX(MS) LB14XX(MS) LB20XX(MS) LB28XX(MS) 7,5Ah 12,5Ah 17,5Ah NOMINAL CAPACITY 183 x 156 x 103mm 235 x 156 x 103mm DIMENSIONS (L x W x H) 99Wh 165Wh 231Wh... - Page 12 3 . 1 . 3 3 . 1 . 4 CHARGING TEMPERATURE LB14XX(MS) LB20XX(MS) LB28XX(MS) LB14XX(MS) LB20XX(MS) LB28XX(MS) CCCV 0°C to 55°C CHARGE METHOD CHARGE TEMPERATURE -22°C to 55 °C / -4°F to 131°F 14,6V MAX CHARGE VOLTAGE DISCHARGE TEMP. MAX.CONTINUES -20°C to 45°C / -4°F to 113°F STORAGE TEMP.
-
Page 13: Required Tools
3 . 1 . 6 REQUIRED TOOLS GENERAL LB14XX(MS) LB20XX(MS) LB28XX(MS) 6 mm Hexagon Allen key BATTERY DESIGNATION >1000 (10C discharge, 100% DoD CYCLE LIFE* SCOPE OF DELIVERY *The cycle life given above is an indication at Room Temperatur (RT). Battery lifespan depends 1x LITE BLOX battery LBXXXX(MS) strongly on application, evironment and the applied charging / discharging currents. - Page 14 OPTIONAL COMPONENTS PROTECTION THRESHOLDS The protection limits are implemented to protect the Li-ion battery from unintentional events that will damage the Li-ion battery. It is not advised to LB 300l #062 depend on these limits and the system itself should make sure that your LITE LIFEPO4 CHARGER BLOX battery will always be within the specified working range.
-
Page 15: Installation
INSTAL LATION GENERAL INFORMATION ! W A R N I N G ! Never install or use a damaged Li-Ion battery ! W A R N I N G ! Never short circuit the Li-Ion battery. L I T E W E R K S G M B H | + 4 9 ( 0 ) 7 5 3 3 / 9 9 2 9 0 0 0 | I N F O @ L I T E B L O X . -
Page 16: Connecting Wires
Carefully check your LITE BLOX battery for damages right after unpacking. around in its compartment during use and that none of the connecting cables are In case of damage or pre-use, contact your reseller / LITEWERKS. beeing stretched or harmed. -
Page 17: Battery Use
BATTERY L I T E W E R K S G M B H | + 4 9 ( 0 ) 7 5 3 3 / 9 9 2 9 0 0 0 | I N F O @ L I T E B L O X . D E... - Page 18 GENERAL INFORMATION ! W A R N I N G ! Follow the safety guidelines of chapter 1. Venting holes for gas and pressure exchange Battery-ID containing Serial-No. (#-spec-digit-digit-digit) + the Battery type (LB-digit-digit-X-X) Minus pole terminal (electrical mass/body) Electric specifications of the LITE BLOX Plus pole terminal 5 | B A T T E R Y U S E L I T E W E R K S...
-
Page 19: Charging Rate
5 . 2 . 1 CHARGING CHARGING RATE ! C A U T I O N ! ! C A U T I O N ! Find the charge rates for the respective LITE BLOX model below and make sure D i s c o n n e c t t h e c h a r g e r To c h a r g e a L i -I o n b a t t e r y , to respect the indicated charge current. - Page 20 5 . 3 . 2 A . V . A . T . INTELLIGENT BMS (Active Vehicle Anti Theft) In the following chapters the expression ‘deactivated’ will be used to an integrated effective guard function, that protects from car theft by describe the switched off state of the LITE BLOX meaning, that the internal automatically deactivating the LITE BLOX in case of an unauthorized starting connection of the bat- tery terminals and the cell pack is inter- rupted...
- Page 21 Soft Close (red): when the LITE BLOX has left the intended operating range, the second level is active, which is indicated by the red coloured SIT TING TIME values of the corresponding values. Furthermore, on this level an automatic deactivation takes place. This cut The sitting time of the LITE BLOX depends on its deactivation status as well off takes place as soon as the BMS switches its operational mode from as on the bluetooth connection status.
- Page 22 5 . 4 . 2 I.K.O.S. ACTIVATED VEHICLE INTEGRATION As there can be a huge number of electric consumers in modern cars, high In modern vehicles intelligent battery-management systems (IBS) can be found. quiescent current for parked vehicles may occur. These systems enables the control unit (ECU) to evaluate the status of the starter The quiescent current limits the sitting time of the LITE BLOX and can vary battery and alternator at any time.
- Page 23 LI TE BLOX „REMOTE“ APP Our LITE BLOX app is available for download, to be run on Android (Play Store) or iOS (Apple Store). Make sure to activate „bluetooth & „location services“ before first use! Google Play Store Apple Store 5 | B A T T E R Y U S E L I T E W E R K S G M B H...
-
Page 24: Start Page
5 . 6 . 1 5 . 6 . 2 START PAGE CONNECTING Press the SCAN button to search for your LITE To connect to your LITE BLOX, proceed as following: BLOX (listed with the respective serial number). By pressing the SCAN-button as described in By pressing the menu-button, a list with the 5.6.1;... -
Page 25: Status Display
5 . 6 . 3 STATUS DISPLAY On the main screen of the APP the display elements that showing the status of the LITE BLOX can be found. The battery element at the top gives a graphical feedback of the LITE BLOX’s SOC in % plus the condition of the four single battery cells (blue / yellow / red). - Page 26 5 . 6 . 4 5 . 6 . 5 DEACTIVATION REACTIVATION In the lower area of the main page of In case of a cut off by the self the app, the two switches for the protection function of the LITE BLOX, it I.K.O.S.
-
Page 27: Firmware Update
5 . 6 . 6 5 . 6 . 8 MENU HISTORY At the top left corner of the main page, a The behaviour of the LITE BLOX in terms of switching-events (I.K.O.S., A.V.A.T. menu-button can be found. By pressing on this menu-button a list of and self protection) is documented in the history- table. -
Page 28: Device Information
5 . 6 . 1 0 DEVICE INFORMATION should not be changed Informations on the current product name, password, firmware version... should not be changed deactivate to protect yourself from misuse when car used in a traffic environment 5 . 6 . 1 1 TELEMETRY DATA If activated Killswitch only can be reactivated with the app or via CAN Bus... - Page 29 CAN-BUS (MS-version only) CAN Baud Rate = 1Mbaud No CAN termination inside of the Battery CAN Com only ON with Input on 0X300 CAN Speed and CAN IDs are configurable (5.6.12.) E C U 2 B M S 1 4 V B M S 1 4 V 2 E C U I D = 0 X 3 0 0 / C A L I B R A T E F I D = 0 X 3 0 1 / C A L...
- Page 30 EXTERNAL KILL-SWITCH (MS-version only) B M S 1 4 V 2 E C U I D = 0 X 3 0 2 / C A L I B R A T E F R E Q . = 2 0 M S ( 5 0 H Z ) 5 .
-
Page 31: Wiring Harness
5 . 8 . 2 WIRING HARNESS 5 | B A T T E R Y U S E L I T E W E R K S G M B H | + 4 9 ( 0 ) 7 5 3 3 / 9 9 2 9 0 0 0 | I N F O @ L I T E B L O X . - Page 32 5 . 8 . 3 KILL-SWITCH STATES Killswitch circuit closed, LITE BLOX is activated and engine is running Killswitch circuit open, LITE BLOX is deactivated and engine is shut off 5 | B A T T E R Y U S E L I T E W E R K S G M B H | + 4 9 ( 0 ) 7 5 3 3 / 9 9 2 9 0 0 0 |...
-
Page 33: Maintenance
MAINTEN INSPECTION Inspect for loose and/or damaged wiring and contacts, cracks, defor- mations, leakage or damage of any other kind. If damage to the Li-ion ANCE battery is found, it must be replaced by a professional. Do not attempt to charge or use a damaged Li-ion battery. - Page 34 STORAGE Follow the storage instructions in this manual to optimize the lifespan of the Li- ion battery during storage. If these instructions are not followed and the Li-ion battery has no charge remaining when it is checked, consider it to be damaged.
- Page 35 For the case that you need your LITE BLOX to be repaired or if you no longer want to keep it, please contact the LITEWERKS customer service. To contact the customer service please use the online-service form available at: https://en.liteblox.de/support.
-
Page 36: 0 | T R O U B L E S H O O T I N G
Attachcharger Senddatavia Does Does Connectwith SEND toLITEBLOX, Wait till L I T E B L O X smartphone smartphon thecharger TELEMETRY over5%? pressCHARGE viaAPP. charger I S N O T e connect? charge? DATA. OVERRIDE. signals „FULL“. W O R K I N G . Press Pleasecontact RESETERROR... -
Page 37: Warranty And Liability
In the event that the customer demonstrates that any of the delivered products do not notify LITEWERKS of the existence of the defect within ten (10) days of having discovered the de- conform to the agreement, LITEWERKS (at its option, upon having received those fect, in writing, in order to enable LITEWERKS to investigate the damage.