BEFORE YOU START
Setting Date, Time and Measurement Unit
It is important to set the clock before using your blood pressure
monitor, so that a time stamp can be assigned to each record that is
stored in the memory. (year: 2019—2059 time:12 H)
1.When the monitor is
off, hold pressing "
SET " button for 3
seconds to enter the
mode for year setting.
2.Press the " MEM "
button to change the
[YEAR].
3.When you get the right
year, press " SET "
button to set down and
turn to next step.
4.Repeat step 2 and 3 to set the [MONTH] and [DAY].
10
PUL.
/min.
PUL.
/min.
PUL.
/min.
PUL.
/min.
PUL.
/min.
Need help?
Do you have a question about the HWEBPM and is the answer not in the manual?