Wolf KG Gigant Series Installation And Maintenance Instructions Manual page 20

EC DECLARATION OF CONFORMITY
We hereby declare that on account of their design and construction and in the versions placed in circulation by us, the
machines listed below are in compliance with the applicable basic health and safety requirements of the EC Directive.
Modifications to the machines undertaken without our prior consent void this Declaration of Conformity.
Designation
of equipment:
Type
designation:
Applicable
EC directives
Applied
harmonised
standards:
Applied
national
standards, e.g.
We hereby declare that the electrical equipment for Wolf airconditioning units type KG, KGW and KG/WO including
the special control cabinets for said products and the control accessories:
room thermostats, room-thermostat timers, remote-control units, actuating motors, valves, valve drives, channel
sensors, room-temperature sensors, room-temperature sensors with setpoint generators, antifreeze thermostats,
remote setpoint generators, differential-pressure sensors, safety temperature monitors, double safety thermostats
airflow monitors, repair switches, auxiliary switches, mixer motors, mixers, pumps and motors
are in compliance with the following guidelines, standards and directives:
Mainburg, 16.10.2000
Wolf GmbH · 84048 Mainburg
20
D-84048 Mainburg
Airconditioning units for indoor installation
Airconditioning units for outdoor installation
Airconditioning units with indirectly fired air heater
KG
KGW
KG/WO
EC Machinery Directive
EC Explosion-Protection
Directive
DIN EN 292 Part 1 and 2
DIN EN 294
DIN EN 349
DIN EN 418
DIN 31001 Part 1
DIN VDE 0700 Part 1
BG Chemie explosion
protection guideline
VDMA 24169 Part 1
Low Voltage Directive:
EMC Directives:
Product standards:
· Postfach 1380
Wolf GmbH
Industriestraße 1
Germany
89/293/EEC as amended 93/44/EEC
94/9/EC (explosion-proof devices)
Safety of machines – Basic terms, general design
principles
Safety distances to prevent upper limbs from touching
danger points
Safety of machines – Minimum distances to prevent
crushing of body parts
Safety of machines – EMERGENCY STOP device
Protection devices
Safety of electric equipment (IEC 335-1)
(explosion-proof devices)
Structural measures for explosion protection in fans
(explosion-proof devices)
73 / 23 / EWG
89 / 336 / EWG
EN 50081-1
EN 50082-2
EN 60730
Managing director sector air handling - ventilation
· Telefon 08751/74-0
Norbert Gruber
· Telefax 08751/741600
Gigant