Advertisement
Attaching to a Bench
IMPORTANT! Before each use or assembly, inspect this
product for damage. DO NOT use if any parts are missing or
broken. Contact Fisher-Price
®
for replacement parts and
instructions if needed. Never substitute parts.
1
Hook
Attachment
Ring
• Turn the booster seat upside down.
• Fasten the strap hooks to the booster seat attachment
rings. Pull up on each hook to be sure it is secure to each
attachment ring.
Seat Back
2
A
B
C
Strap
• Place the booster seat upright on a bench.
• Unfasten the seat back and lift.
• Wrap the strap around the bottom of the bench
• Fasten both straps
B
. Make sure you hear a "click".
• Tighten the strap
C
.
• Pull down on the strap to be sure it is secure around the
bench bottom.
Using as a Backpack
1
Hook
Fastener
Attachment
Ring
Hook
Attachment
• Turn the booster seat upside down.
Ring
• Unfasten the fasteners on the sides of the booster seat to
locate the attachment rings.
• Fasten the strap hooks to the booster seat attachment rings.
Pull up on each hook to be sure it is secure to each
attachment ring.
• Fasten the fasteners on the sides of the booster seat.
2
Loop
For Backpack:
• Fit the strap through the loop on the booster seat.
• Fasten both straps. Make sure you hear a "click".
A
.
• Tighten or loosen the strap, as needed.
For Carry Pack:
• Fasten both straps. Make sure you hear a "click".
• Tighten or loosen the strap, as needed.
or Carry Pack
Hook
Fastener
Attachment
Ring
Carry Pack
Strap
Backpack
Care
• Lower the seat back and fasten the fastener.
• Unfasten the zipper on the large pocket.
• Remove the plastic seat insert from the booster seat
liner. Wipe the plastic seat insert and booster seat
liner with a mild cleaning agent and damp cloth. Rinse
with clean water to remove residue.
• Position the plastic
Outer
seat insert with the
Upper
Fastener
seat back facing up.
Pocket
Tabs
Seat
• Position the booster
Back
seat liner with the outer
fastener tabs upright.
Unfasten the zipper on
the large pocket.
• Fit the plastic seat insert
into the large pocket in
the booster seat liner,
so that the seat back fits
Large
into the upper pocket.
Pocket
• Make sure the inner
Plastic Seat Insert
fastener tabs on the
booster seat liner are
through the openings in
Inner Fastener Tabs
the plastic seat insert.
• Turn the booster seat
over with the Fisher-Price
logo down.
• Fasten the outer fastener
tabs to the inner fastener
tabs.
• Fasten the zipper closed.
Outer Fastener Tabs
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2000 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in China
®
79463a-0920
Advertisement
