Changing The Infrared Lamp; Cleaning And Care Of The Unit - Bosch+Sohn Boso bosotherm 5000 Instructions For Use Manual

echnical dat
T a
Model
Protection level
Protective eyewear designation
Light transmission level
Maximum average spectral
trans mittance value with infrared
Hans Dinstlage GmbH
Riedlinger Straße 28
88524 Uttenweiler, GERMANY
Notified body:
ECS European Certification Service GmbH
Hüttfeldstraße 50
73430 Aalen, Germany
Identification number: 1883
EU declaration of conformity: http://sanitas-online.de/web/de/landingpages/cedeclarationofconformity.php

6. Changing the infrared lamp

The device must be switched off and allowed to cool and the mains plug pulled out before cleaning and chang-
ing the infrared heat lamp.
Please note that only infrared lamps of the original type may be used as replacements.
Replacement infrared lamp (type):
Infrared PAR 38 (150 W)
Warning
• Do not touch the infrared lamp or unscrew it when it is connected to the mains.
• Unplug the device, to avoid the risk of electrocution.
• In the interest of environmental protection, do not dispose of the device in household waste.

7. Cleaning and care of the unit

The unit should be cleaned occasionally.
Important
To avoid odours caused by fluff and dust, we recommend regularly cleaning the device as follows:
• The device must be switched off and allowed to cool and the mains plug pulled out before cleaning and
changing the infrared heat lamp.
• Ensure that no water penetrates inside the unit!
• Do not wash the unit in a washing machine!
Clean using a damp cloth, to which you can apply a little detergent if necessary.
• Do not touch the unit with wet hands while it is plugged in; do not allow any water to be sprayed onto the
unit. The unit must be operated only when it is completely dry.
• Do not use abrasive detergents and never immerse the unit in water.
SEP 01
4 -10 in accordance with EN 171:2002
4-10 HAD CE
The code for the lenses is comprised of the following:
- Initial number for IR protection filter
(1st part of code)
- Protection level number
(2nd part of code)
- Manufacturer's code
(3rd part of code)
- CE mark (4th part of code)
Max. 0.023%
Min. 0.0085%
780 – 1400 nm: 0.050%
780 – 2000 nm: 1.3%
Specifications: Item number:
230V ~ 50 Hz 616.51
12