Method 2:
Set the Motion-timelapse mode parameters by entering the Motion Timelapse
interface on screen. Operate with joystick to set up time setting parameter on
touch screen.
Display icon
PAN (T1)
TILT (T2)
INVL (t)
DWELL (P)
Photography waiting time
PAN: Time required for the pan axis to rotate from the start point to the end point.
TILT: Time required for the tilt axis to rotate from the start point to the end point.
INVL: The time between the end of the previous shooting and the end of the next
shooting.
DWELL: Gimbal staying time after sending a photographing command for long
exposure.
* T1/T2 > t > P
3.6.2 Route setting
(1) Enter Route setting interface under Motion timelapse menu.
(2) Set the start position
Rotate the pan or tilt axis to a desired position, hold on for 0.5 seconds. Tap OK
on screen to record a start position.
Mode/Status
Pan axis rotation period
Tilt axis rotation period
Photographic interval
Minimum time
setting
00:00:00
00:00:00
00:00:00
00:00:00
www.feiyu-tech.com
Maximum time
setting
07:59:59
07:59:59
00:00:59
00:00:58
18