Table of Contents
Advertisement
4. Before leaving or servicing machine:
–
Turn off machine.
–
Unplug cord from wall ou
5. When servicing machine:
Unplug cord from wall outlet.
–
–
Av
oid moving parts. Do not wear loose
jackets, shirts, or sleeves.
–
Use manufacturer supplied or approve
replacement parts.
6. When dry cleaning:
Always connect exhaust hose to vacuum
–
exhaust and vent to outside of building.
Always use a high capacity air mover in
–
room being cleaned to dissipate vapors.
Never heat in 208° F. heat range.
–
–
Always secure both lids to tanks.
WARNING: Hazardous Voltage. Shock or
electrocution can result. Always unplug machine
before servicing.
4
tlet.
d
WARNING: Do not use chlorinated solvents
or OMS with a flash point below 125° F. Do not use
OMS alone. Use a cleaning charger which raises
the flash point and enhances cleaning.
WARNING: Flammable materials or reactive
metals can cause an explosion or fire. Do not pick
up.
GROUNDING INSTRUCTIONS
Machine must be grounded. If it should
malfunction or breakdown, grounding provides a
path of
least resistance
reduce the
risk of el
ectrical sh
equipped with a cord having an equipment-
grounding connector and grounding plug. The
plug must be plugged into an appropriate outlet
that is properly installed in accordance with all
local codes and ordinances. Do not remove
ground pin; if missing, replace plug before use.
GROUNDED OUTLET
(3 HOLE)
GROUNDING
PIN
for electrica
l current to
ock. This machine
32506 (11-98)
is
Advertisement
Table of Contents
