Service Care - Alpine R-A75M Owner's Manual

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any
other safety-related system), or tanks should NEVER be
used for installations or ground connections. Using such
parts could disable control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
~CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
property damages.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to
the product. Return it to your authorized Alpine dealer or
the nearest Alpine Service Center for repairing.
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special
technical skill
and experience. To ensure safety, always
contact the dealer where you purchased this product to
have the work done.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
Be sure to use only the specified accessory parts. Use of
other than designated parts may damage this unit
internally or may not securely install the unit in place. This
may cause parts to become loose resulting in hazards or
product failure.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like
the seat rails) or sharp or pointed edges. This will prevent
crimping and damage to the wiring. If wiring passes
through a hole in metal, use a rubber grommet to prevent
the wire's insulation from being cut by the metal edge of
the hole.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE
OR DUST.
Avoid install ing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this
unit may result in product fai lure.
2 -EN
SERVICE CARE
♦
IMPORTANT NOTICE
This Amplifier has been type tested and found to
comply with the limits for a Class B comput ing
device in accordance with t he specifications in
Subpart
J
of Part 15 o f FCC Rules. This equipment
generates and uses radio frequency energy, and it
must be installed and used properly in accordance
w ith the manufacturer's instructions.
SERIAL NUMBER: _ _ _ _ _ _ _ _ _ _
INSTALLATION DATE: _ _ _ _ _ _ _ _ _
INSTALLATION TECHNICIAN: _ _ _ _ _ _
PLACE OF PURCHASE:
♦
IMPORTANT
Please record the serial number of your unit in
t he space provided here and keep it as a
permanent record. The serial number plate is
located o n t he rea r of t he unit.
♦
For European Customers
Shou ld you have any q uestions about warrant y,
please consu lt your store of purchase.
♦
For Customers in other Countries
IMPORTANT NOTICE
Custom ers who purchase t he product w ith which
this notice is packaged, and who make t his
purchase in countries other than the United St ates
of America and Canada, please contact your dealer
for information regarding warrant y coverage.