Table of Contents
Advertisement
31. SETTING THE TIME
Set Slide Switches as Example Below:
EXAMPLE: Set TIME to 4:37 PM
Step #
Enter
1.
TIME/DATE Key and hold
2.
3.
16
4.
37
5.
6.
7.
1.
Depress the CE/C key. Your display with show 0. and the tape will read 0.C.
2.
Depress the TIME/DATE key and hold until the display is flashing.
3.
Tap the TIME/DATE key to go to Time Mode.
4.
Enter the hour, in our example 16 in military time. Your display will show 16.
5.
Enter the minutes, in our example 37. Your display will show 1637.
6.
Tap the TIME/DATE key to set the TIME. Your display will now show P 04-37-00 and the
seconds will begin counting.
7.
To PRINT the TIME, depress the (#/S) key, your tape will show #•04•37.
NOTE: On the PRINT on the paper tape, the dot in front (#•07•05) means PM, there will
be no dot printed for AM.
Depress This Key
Clear Key (CE/C)
Flashing Numbers in This Format -
until display flashes
Tap TIME/DATE key to
switch to Time Mode
Tap TIME/DATE Key
#/S Key
Decimal
Your Display Will Show
0.
MM-DD-YYYY
Flashing Numbers in This
Format – HH-MM-SS
16
1637
P 04-37-00
P 04-37-00
Rounding
2
5/4
28
Tape Will Read
0.C
#•04 •37
Σ
GT
Print
PRINT
.
.
Hide quick links:
Advertisement
Table of Contents
