Antenna Assembly - Sony Ericsson F500 Working Instruction, Mechanical

3.23

Antenna assembly

Tools
• Torque screwdriver, set to 15 Ncm ± 6%. Bits6, NTZ 112 288
•
Snap opening tool NTZ 112 544
•
K700i/Front opening tool NTZ 112 540
•
Front opening tool NTZ 112 302/2
•
Flex film assembly tool NTZ 112 521
•
Blunt pair of tweezers
•
Screw driver tip width 6-8mm
•
Disassemble the phone as described in 1 Disassembly.
Step-by-Step Instructions
1 Remove the antenna flexfilm from the frame
with a blunt pair of tweezers or with your
fingers.
2 Press on the antenna carrier plug with a screw
driver, tip width 6-8 mm. Start pressing from the
inside of the frame until the whole antenna
assembly is released.
NOTE!
When the antenna assembly has been removed,
clean the surface of the frame (backside) with
Isopropyl alcohol.
3/000 21-1/FEA 209 544/86 E
©
Company Internal Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
38(43)