Picture Control Adjustments - Toshiba VTV21FL3 Operating Instructions Manual

PICTURE CONTROL ADJUSTMENTS

The picture setting have been factory adjusted under optimum signal reception. However, conditions may not be the same
in your area. After tuning in the TV/VCR, allow it to warm up for a few minutes. If the picture is not to your liking, make the
following adjustments using the remote control.
Press the MENU button.
Press the or button to select the TV SETUP
mode, then press the ENTER button.
PLAY
MENU
STOP
1 4
Press the ENTER button until your desired
PICTURE mode appears e.g. brightness, contrast,
color, or sharpness. Then press the
button to adjust the PICTURE. (See the next page
for detail.)
ENTER
REW
NOTE: To resume the normal picture adjustment, press the CANCEL button, while in the picture mode menu.
5960101A/E/11-16
ENTER
TIMER REC SET
VCR SETUP
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
SELECT :
ENTER : ENTER
EXIT : MENU
1 2
After finishing the adjustment, press the MENU
button to return to normal TV screen.
or
FF
BRIGHTNESS 0
SET : EXIT : MENU
RESET : CANCEL
NEXT : ENTER
15
Press the or button to select the PICTURE
mode, then press the ENTER button.
ENTER
PLAY
STOP
TV SETUP
ON/OFF TIMER SET
PICTURE
SELECT
ENTER
EXIT
1 2 3
3
MENU
28/5/01, 1:41 PM
:
: ENTER
: MENU
15