Installation - Victron energy GX LTE 4G Series Manual

2020-08-01 15:42

2. Installation

Mount the device and connect the antenna. Consider using the outdoor antenna when installing the
GX LTE in a closed metal enclosure or car or van.
Insert the SIM card. You will need to eject the SIM card tray with a pen or other pointy object. Be
aware that the SIM card tray sits slightly recessed inside the unit. Be sure to push it all the way in.
Connect the GX LTE to the GX-device with the supplied USB cable. Use a USB hub if all USB sockets
are already in use.
Connect DC power supply (8 to 70 VDC). A 1.4M wire is included, with M10 lugs and an inline XXX A
fuse.
After power-up, the blue LED will be solid blue. Next, once it has registered on a network, it will start
blinking slowly. Finally, when it has established the internet connection, it will be blinking fast.
3. Configuration
When using a SIM card with its SIM-pin security disabled, the system will work without further
configuration.
Setting a SIM pin helps reducing the risk of the SIM card being stolen and used. Use a mobile phone to
set the SIM pin, and there after configure it on the GX-device.
Settings → GSM modem → PIN code
Victron Energy - https://www.victronenergy.com/live/
3/9 GX LTE 4G - Manual