Download Print this page

Advertisement

Quick Links

Damson
HearBuds
U S E R G U I D E

Advertisement

loading

Summary of Contents for DAMSON HearBuds

  • Page 1 Damson HearBuds U S E R G U I D E...
  • Page 2 “R” is placed in the right ear. Navigate to your Bluetooth settings on your streaming device and select “HearBuds”. You will hear the voice prompt, “Damson headset connected”. You can now stream audio from you device.
  • Page 3: Function Buttons

    P L E A S E N OT E : pairing is only required once per streaming device. After the first use your HearBuds will automatically connect to the device. Function buttons Pause/ Tap once on the button Resume audio (either bud) to pause.
  • Page 4 C H A R G I N G Charge the case To charge the case, insert micro-USB end of the supplied charging cable into the rear of the charging case. Place the USB end of the supplied cable into a USB plug and charge from the mains supply using a DC5V/2A plug.
  • Page 5 The LED’s on the HearBuds will turn RED while charging. When the HearBuds are fully charged, the LEDs will briefly flash BLUE and then go out. The HearBuds can be charged at the same time as the case is charging. charging...
  • Page 6 3. Press and hold the button until you hear “power off” and let go. 4. Press and hold the button on both HearBuds. You will hear it announce “power on” and “paring mode” and finally 2 sets of descending beeps.
  • Page 7 5. Place the HearBuds back into their charging case until the red led turns on. 6. Take them out. The HearBuds will both flash blue a couple of times and then the left HearBud will flash alternatively. 7. Connect to your smart device. Your Hear- Buds should now be reconnected to each other and your device.
  • Page 8 1. Ensure the HearBuds are charged. 2. Remove both HearBuds from the charging case. 3. Press and hold the button on both Hearbuds until the LED flashes alternatively red/blue twice and then stop. 4. Return the HearBuds to the charging case.
  • Page 9 1. Remove both HearBuds from the charging case. 2. Press and hold the button on both HearBuds until the flash red/blue alternatively. 3. Double press the button on one Hearbud. 4. The HearBuds should now be completely...
  • Page 10 Charge time IPX4 – sweat and rain Water Resistance rating resistant Frequently asked questions Q: There are two “HearBuds” listed on my device. A: Forget both “HearBuds” and repair using the instructions. Customer support For customer support numbers and live chat...