Instruction Manual Bluetooth Headphone Model No.: DAHP01 Thank you for purchasing this Bluetooh headphone. Please read the instructions and warnings carefully before use to ensure safe and satisfactory enjoyment of this product. Important safety information Adjust the headphone sound to the proper volume. Loud sound may damage your ears.
WARNING This equipment is not waterproof. To prevent a fire or shcok hazard, do not place any container filled with liquid near this equipment(such as a vase or flower pot) or expose it to dripping, splashing,rain or moisture. To prevent a fire hazard, do not place any naked flame sources (such as lighted candle) on the equipment. Desciption of the appliance Specifications Bluetooth Solution: CSR...
Set the bluetooth device within one meter to the wireless headphones. These wireless headphones will appear in the bluetooth device’s display as “Damson HeadSpace”. Confirm that pairing has been successfully completed with the bluetooth device. Look at the display for the bluetooth-enabled device and select “Damson HeadSpace”.
When you slide the NC button to the “On” side, the indicator will turn on, then you can enjoy the headphone in Noise cancellation mode. When you don’t need the Noise cancellation function, please slide the NC button to the OFF side. Making calls with the headset Functions Status of headset...
Disconnecting from the bluetooth device Hold the wireless headphones bluetooth button depressed for about five seconds to turn off the power. Troubleshooting Problem Remedy Power won’t turn on Recharge the wireless headphones The batteries will not charge Confirm that computer is ON. Confirm that computer is not in power-saving mode.
FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.