Advertisement
4. HEATER OPERATION
4.1.
Operating the heater.
4.2.
Place the heater in a suitable position in the area you require to heat.
Allow a minimum of 50cm between the heater and adjacent objects such as furniture etc.
4.3.
Plug the heater into the mains supply.
4.4.
Turn the thermostat knob to a high setting.
Selecting the heat output. (Refer to fig.7)
4.5.
Choose the required heat output by selecting the appropriate switch which will light up when
pressed. (See fig.7)
Low setting
Medium setting
High setting
Using the thermostat. Once the required room temperature has been achieved, turn the thermostat
4.6.
slowly down in the direction of the min. setting until the heat output switch light goes out. The heater
will then keep the surrounding air at the set temperature by switching on and off at intervals. You
may reset the thermostat at any time.
4.7.
Turbo fan feature (CD2005T only). To boost the output of air at any temperature setting select the
lower switch which has a fan symbol beside it. The fan can also be used to circulate cool air only by
switching off the two heat setting switches.
4.8.
To switch the unit off, turn the heat selecting switches off and unplug from the mains. Allow the unit
to cool before handling or storage.
WARNING! DO NOT touch the top of the heater when in use as it becomes hot.
4.9 .
Safety cut out feature.
The heater is fitted with a thermostatic safety cut out which will automatically turn the heater off
should should the airflow become blocked or if the heater has a technical malfunction. Should this
happen, switch the heater off and unplug it from the mains power supply.
WARNING! In such a case the heater will be very hot.
DO NOT connect the heater to the power supply again until the reason the safety cutout activated
has been identified. Allow the heater to completely cool before handling and then check the air inlet
and outlet for obstructions before attempting to switch the unit back on. If the cause is not obvious
return the heater to your local Sealey dealer for servicing.
5. MAINTENANCE
Before attempting any maintenance ensure the unit is unplugged from the mains power supply and that it is cool.
5.1
Clean the unit with a soft dry cloth. DO NOT use abrasives or solvents.
5.2.
Periodically check the air inlet and outlet to ensure the air way is clear.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
(750W)
Select middle switch.
(1250W)
Select upper switch.
(2000W)
Select both switches.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
fig.7
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
CD2005, CD2005T
CD2005T
CD2005T
Issue: 3 - 13/04/10
Advertisement
