This device is designed to effectively disinfect and sterilize the resin in your water treatment system. Once installed, it works in conjunction with a Hankscraft Runxin valve with an output power of DC5V/200mA. During brine draw, salt water runs through the device and is electrolyzed to produce a weak solution of hypo chloric acid that is safe for treatment of supply water.
4. Place tubing with insert into the disinfection device until the stop is reached. Tighten the hex nut until firm. 5. Repeat Steps 2-4 for the opposite side of the disinfection device. Hankscraft Runxin, LLC 300 Wengel Drive 608.524.9465 hrh2o.com sales@hrh2o.com...
Page 6
Disinfection Device 6. Connect power cable to the disinfect connector on the valve’s main board Connect Disinfection Device Here Hankscraft Runxin, LLC 300 Wengel Drive 608.524.9465 hrh2o.com sales@hrh2o.com...
Hankscraft Runxin warrants to the original owner that the items listed below, excluding but not limited to wear parts like O-rings, gaskets and seals, will be free from defects in materials and workmanship for the period of time specified below from the original purchase date.
Page 9
God. No other person is authorized to make any other warranty on behalf of Hankscraft Runxin either during or after the applicable warranty period.
Need help?
Do you have a question about the 47010 and is the answer not in the manual?
Questions and answers