Turning the power on
The standby display appears when you turn the
A5402S on.
You can operate the A5402S functions, e.g. phone and
mail, from the standby display. When you have
finished an operation, the display returns to the
standby display.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1
1
Hold down t for at least one second.
a When the power is turned on, the standby display appears.
Check the remaining battery power.
Full
• Charge the battery pack when there is little power left.
Check the reception state.
Strong
• You cannot receive or make calls if "
• Sometimes you cannot receive or make calls if " " (Very weak) is displayed.
Turning the power off
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1
1
Hold down t for at least two seconds.
To receive calls, leave the power on.
12
Medium
Low
No power left
Medium
Weak
Very weak Out of service area
圏外
"
(Out of service area) is displayed.
q
menu
mail
EZ
(standby display)