Advertisement

Quick Links

Parts & Service Enquiries: 1800 465 070 (Australia); 09 477 6020 (New Zealand)
Or email:
Sales Enquiries: 1800 777 137 (Australia); 09 477 6020 (New Zealand)
Plus Bonus sling swing pieces. These can
be substituted for the trapeze or tot
swing on the swing unit:
Please read and RETAIN this manual as it will assist with identification for parts and service.
- This play fort is for family domestic use only.
- This play fort is designed for use by children 3-9 years of age weighing no more than 34kgs.
- Tot Swing component only is designed for use by infants aged 19 months to 3 years.
- This play fort has a maximum total user weight limit of 204kgs (6 children).
- Children of all ages must be supervised by an adult at all times when using this play fort.
- Adult assembly of this play fort is required. Two adults are recommended for assembly.
©ACTION SPORTS EQUIPMENT PTY LTD –
Action Sports Equipment Pty Ltd.
72 Silverwater Rd, Silverwater, NSW, Australia, 2128
service@actionspares.com.au
Or visit our website: www.actionsports.com.au
Model: S001049 - Super Play Fort II
Assembly, Installation, Care, Maintenance and Use Instructions
Manual depicts typical installation
STANDARD UNIT SET UP
Read this manual prior to assembling and using this Play Fort.
This Product is for Domestic Use Only.
www.actionsports.com.au
(Australia);
orders@bernsport.co.nz
IMPORTANT
- Warning -
(New Zealand)
Page: 1

Advertisement

Table of Contents
loading

Summary of Contents for Action Sports Super Play Fort II

  • Page 1 (New Zealand) Sales Enquiries: 1800 777 137 (Australia); 09 477 6020 (New Zealand) Or visit our website: www.actionsports.com.au Model: S001049 - Super Play Fort II Assembly, Installation, Care, Maintenance and Use Instructions Manual depicts typical installation STANDARD UNIT SET UP Plus Bonus sling swing pieces.
  • Page 2 15) Do not stand on the seats when using the swing set. 16) Do not climb on the side braces or the top support of the swing set, on the outside of roof of the play fort. ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au...
  • Page 3: Table Of Contents

    SECTION 7 – LADDER ASSEMBLY ......................26 SECTION 8 - SLIDE ASSEMBLY ........................27 SECTION 9 – FIREMAN POLE ASSEMBLY ....................29 MAINTENANCE INSTRUCTION ......................... 30 CAUTION ................................30 WARRANTY INFORMATION ..........................31 ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 3...
  • Page 4: Parts List - Main Frame

    Sand Pit Stay Middle Main Frame Tube Fort Platform Support Tube Connect Tube to Swing or Fireman Pole Connect Tube Canopy Roof Frame Upper Main Frame Tube Canopy Roof Support Tube ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 4...
  • Page 5: Parts List - Sling Swing

    Sand Pit Cover Fort Jumping Mat Fort Enclosure Net Canopy Plastic Peg PARTS LIST – SLING SWING Parts # Parts Description Sling Swing Assembly Eyebolt Assembly (pre-assembled) Oval Opening Cap (pre-assembled) ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 5...
  • Page 6: Parts List - Trapeze

    Washer (M8) (pre-assembled) Nylock Nut (M8) (pre-assembled) Eyebolt (Pre-assembled) Eyebolt Sleeve (Pre-assembled) Ring Hook (Pre-assembled) U-Shape Bracket (Pre-assembled) Hex Nut (M6) (Pre-assembled) Nylock Nut (M6) (Pre-assembled) Trapeze Handle Chain Support Tube ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 6...
  • Page 7: Parts List - Glide Ride

    Tot Swing Support Tube TS-5 Seat and Back Plate (seat plate with one hole at the centre of front panel) Eyebolt & Link Assembly (pre-assembled) Washer (M8) (pre-assembled) Nylock Nut (M8) (pre-assembled) ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 7...
  • Page 8: Parts List - Slide

    Slide Base Board MS-4 Slide Support Tube MS-6 Platform Support Tube MS-16 Platform Base Tube MS-17 Handle Tube MS-18 Slide Leg Tube MS-19 Stabilizing Tube Slide Leg Connecting Tube Fort Connect Tube ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 8...
  • Page 9: Parts List - Ladder

    Fireman Pole Tube with pre-assembled Connector Base Long Nut Bolt Long nut Washer Hex bolt (1) Ø 6x40mm - long nut (2) Ø 6.5mm - washer Ø 6x15mm – hex bolt ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 9...
  • Page 10: Parts Match List - 1:1 Actual Scale

    PARTS MATCH LIST – 1:1 Actual Scale ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 10...
  • Page 11 ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 11...
  • Page 12 ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 12...
  • Page 13 ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 13...
  • Page 14 ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 14...
  • Page 15 ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 15...
  • Page 16 Tools included in the Item Wrench x 2 Allen Key We recommend using a socket set (not included) which will make the installation easier and quicker. ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 16...
  • Page 17: Assembly And Installation Instruction

    Use the Parts List to make sure all parts are present. Contact Customer Service at 1800 465 070 (Australia) or 09 477 6020 (New Zealand) if any parts are missing. Do not attempt to assemble the swing set if any parts are missing. ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 17...
  • Page 18: Section 1 - Fort Assembly

    The two D68 pieces must be on the same sides (parallel to) as the two D65 cross pieces. Connect piece D64 on remaining side before adding nuts and bolts. ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 18...
  • Page 19 On all four sides, add (F5) bolt and nut x 8 for the upper holes on the middle main frame tube D62. ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 19...
  • Page 20 Using hook and loop pieces at the top of the Fort enclosure net and in the corners secure and tension the fort sides. ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 20...
  • Page 21: Section 2 - Main Frame Assembly

    At the beginning, do not over tighten the screws when assembling the Legs (Part# A11 & A12) to the Top Support Tube (Part# A10). This will make it easier to make final alignment and adjustment. Once all screws have been properly installed, tighten them securely with wrenches or socket set. ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 21...
  • Page 22 The correct installation of eye bolt requires that the thread of the bolt does not protrude more than 1 to 2 complete turns/threads past the top of the Nylok nut. DO NOT OVER TIGHTEN EYEBOLTS! THIS CAN RESULT IN ASSEMBLY FAILURE! ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 22...
  • Page 23: Section 4 - Trapeze Assembly

    The correct installation of eye bolt requires that the thread of the bolt does not protrude more than 1 to 2 complete turns/threads past the top of the Nylok nut. DO NOT OVER TIGHTEN EYEBOLTS! THIS CAN RESULT IN ASSEMBLY FAILURE! ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 23...
  • Page 24: Section 5 - Glide Ride Assembly

    SECTION 5 – GLIDE RIDE ASSEMBLY Attach the Glide Ride to the Main Frame set up in Section 2 as shown in Figure 13. Figure 13 ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 24...
  • Page 25: Section 6 - Sling Swing Assembly

    The correct installation of eye bolt requires that the thread of the bolt does not protrude more than 1 to 2 complete turns/threads past the top of the Nylok nut. DO NOT OVER TIGHTEN EYEBOLTS! THIS CAN RESULT IN ASSEMBLY FAILURE! ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 25...
  • Page 26: Section 7 - Ladder Assembly

    SECTION 7 – LADDER ASSEMBLY Assemble the Ladder as shown in Figures 15 to 17. Figure 15 Figure 16 Figure 17 ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 26...
  • Page 27: Section 8 - Slide Assembly

    SECTION 8 - SLIDE ASSEMBLY Assemble the Slide as shown in Figures 18 to 23. Figure 18 Figure 19 Figure 20 ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 27...
  • Page 28 Figure 21 Figure 22 Figure 23 ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 28...
  • Page 29: Section 9 - Fireman Pole Assembly

    Play Fort when completed should resemble the diagram below. Before use, do a final inspection of the unit, ensuring all plastic, and assembly tools are removed from the play area, and also that all screws are correctly tightened. ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 29...
  • Page 30: Maintenance Instruction

    As a parent, supervisor, owner or guardian, it is your responsibility to ensure that the swing set is properly maintained. Spare parts are available through ACTION SPORTS Customer Service centre. Please call 1800 465 070 (Australia) or 09 477 6020 (New Zealand).
  • Page 31: Warranty Information

    Photos of the product, and scans of receipts, may be requested to assist with your claim. The service centre representative will assess the claim. If: ©ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 31...
  • Page 32 The sending of replacements, spare parts or the cost of repair carried out by the Service Centre will be organized and covered by Action Sports. If collection of the item is required this will be organized by the Service Centre and at our expense.

This manual is also suitable for:

S001049

Table of Contents