NHL-4J/NHL-4JX
Disassembly Instructions
Assembly Instructions for Camera Module
Shift the SRT-10 into the camera groove.
Place Camera Module into its guidance. It is very important
to take correct position of the Camera Module to avoid
destruction of this device.
Put the Connector Shield on the camera guidance and
press it down.
Page 6
Company confidential
Take the Camera Module carefully and note the
Use SRT-10 to lock Camera Module into its guidance. Note
locking order.
Check, that Camera Module is clean. When it is necessary
to clean the Camera lens, use compressed air for this
procedure only.
Nokia Corporation.
CCS Technical Documentation
Issue 2 06/03
marking.