Operation Instructions; Cleaning; Technical Data; Oscillation - ProKlima TFN-111449.2 Instruction Manual

OPERATION INSTRUCTIONS

1. Make sure the recharge switch is at "OFF" position before connecting the appliance to a power supply.
2. Insert the power cord into the socket on the back of the appliance, and then plug the power cord into an
appropriate power outlet.
3. Press the power switch to the "ON" position. Turn on the appliance by pressing the ON/OFF button.
4. Use the speed selection button to choose the wind type. The default after turning on the appliance is all
five little fans running and all three indicator lights illuminating (S3). Press the speed selection button one
time, there will be three little fans running and two indicator lights illuminating (S2). Another press to the
speed selection button will make only two little fans running and one indicator light illuminating (S1). At
this time, if you press the button again, the wind type will turn back to the default setting. (See the
illustration below.)
5. Oscillation: Press the oscillation button to make the upper body of the appliance oscillate or not. The
direction of air flow can be adjusted by this way.
6. Turn off the appliance by ON/OFF button when you do not want to use it.
Note:
The buttons on control panel and remote control have the same functions regarding setting the appliance.

CLEANING

Before servicing the appliance and after each occasion of use, switch off the appliance and unplug the

power cord from power outlet if the power cord is connected.
Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it

down with a damp cloth and then dry it carefully. Always take out the mains plug first.
Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it

occasionally using a dry brush or vacuum cleaner.

TECHNICAL DATA

Operating voltage: 220-240V ~ 50/60Hz
Power consumption: 25W
- 37 -