Download
Share
Print this page
  1. Manuals
  2. Brands
  3. OEM Manuals
  4. Impact Driver
  5. 24402
  6. Owner's manual

OEM 24402 Owner's Manual

1/2” air impact wrench
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
1/2" Air Impact Wrench - 24402
SPECIFICATIONS:
Bolt capacity...................................................................................................................1/2in.
Square drive...................................................................................................................1/2in.
Recommended air pressure (tool in use at full throttle) .................................................90 PSI
Maximum torque.............................................................................................................450 Ft. Lb.
Average air consumption................................................................................................5.0 CFM
Free speed .....................................................................................................................7,000 RPM
Air inlet............................................................................................................................1/4in.
Recommended hose size...............................................................................................3/8in.
Clutch Type....................................................................................................................Twin Hammer
Weight.............................................................................................................................5.76 Lb.
Sound Level...............................................................................................96.2 db.A
WARNING!
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS
BEFORE OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN
PERSONAL INJURY AND/OR PROPERTYDAMAGE AND WILL VOID WARRANTY.
Made in China

Advertisement

loading

Related Manuals for OEM 24402

Summary of Contents for OEM 24402

  • Page 1 1/2” Air Impact Wrench - 24402 SPECIFICATIONS: Bolt capacity........................1/2in. Square drive........................1/2in. Recommended air pressure (tool in use at full throttle) ..........90 PSI Maximum torque......................450 Ft. Lb. Average air consumption....................5.0 CFM Free speed ........................7,000 RPM Air inlet..........................1/4in. Recommended hose size....................3/8in. Clutch Type........................Twin Hammer Weight..........................5.76 Lb.
  • Page 2 1. This impact wrench is rated to 1/2” USS bolt size. Rating will decrease for U-Bolts, Long Cap Screws, Spring Fasteners and rusted/corroded Fasteners. All of these factors absorb power and reduce torque capability. 2. Use only impact sockets designed for impact wrenches. 3.

  • Page 3: Insufficient Power

    Clean air and correct air pressure is recommended for the power supply for this tool. A maximum of 90 PSI at the tool is recommended for most air tools of this class. Check specifications section for recommended pressure. (Depending on length of air hose and other circumstances, air pressure at compressor may need to be increased to 100 PSI to ensure 90 PSI at the tool.) Water in the air hose and compressor tank contributes to reduced performance and damage of the air tool.

  • Page 4: Safety Rules

    Safety Rules WARNING: READ ALL INSTRUCTIONS. Do not attempt to operate the tool until you read and understand all safety precautions and manual instructions. Never use oxygen or combustible gas as a power source for the tool. EXPLOSION MAY OCCUR. Use dry, filtered, lubricated and regulated compressed air only. Never use gasoline or other flammable liquids to clean the tool.

  • Page 5: Operation

    Operation WARNING: Protect your eyes and ears. Wear safety glasses with side shields. Wear hearing protection. Employers and users are responsible for ensuring the user or anyone near the tool wears this safety protection. 1. Check and replace any damaged or worn components on the tool. The safety warning labels on the tool must also be replaced if they are illegible.

  • Page 6: Maintenance And Care

    OEM Limited One Year Warranty For one (1) year from the date of purchase OEM tools will warranty this tool against defects in materials and workmanship. Defective OEM brand hand tools purchased from an authorized OEM distributor will be repaired or replaced when returned freight prepaid to the OEM Warranty Dept., 3580 E.
  • Page 8 Q’TY Q’TY PART NO. ASSY DESCRIPTION PART NO. ASSY DESCRIPTION 24402A Housing 24402U Bearing 24402B Valve Sleeve 24402V Front Rotor Bearing 24402C O-Ring 24402W Bead Flange 24402D Spring 24402X Cylinder 24402E Valve Stem 24402Y Cylinder Dowell 24402F Air Inlet Bushing 24402Z Anvil Bushing 24402G...