Advertisement
Table of Contents
- 1 Need to Know
- 2 24" Single Section Standard Height Wildlife Cover
- 3 24" Double Section Standard Height Wildlife Cover
- 4 47" Single Section Standard Height Wildlife Cover
- 5 47" Double Section Standard Height Wildlife Cover
- 6 24" Single Section Tall Height Wildlife Cover
- 7 47" Single Section Tall Height Wildlife Cover
- Download this manual
Assembly Instructions
Raised Vegetable Gardens
Wildlife Covers
These written instructions, as
provided with your purchase, will
always be the latest iteration of the
instructions and match the product
shipped and provide the most
complete up-to-date information.
Note: Wildlife Covers are an
optional add-on product to a
Raised Vegetable Garden base...
which are sold seperately.
Copyright ® Endure Products, LLC... all rights reserved. This document is provided to you for your own personal limited use as a paying customer to assemble your product.
We consider these instructions company intellectual property and are granting you limited personal use only. Do not copy or distribute without written permission of Endure
V1-6
Feb 2020
Products, LLC. We claim all available Federal protection for our various trade names, our protected designs and trade dress as is allowed by any and all Federal intellectual
property protection laws. We invest heavily in your product and work very hard to do a good job and it is only fair that our workers benefit for their hard work.
These instruction cover these models...
SKU 34721
4x4 Wildlife Cover
SKU 32421
2x4 Wildlife Cover
Help Text-line: 512-596-5200
EMAIL: support@roostandroot.com re: RFB Assembly Support
VOICE: 877-741-COOP | Assembly Support ext 3
SKU 34722
4x4 Wildlife Cover
SKU 32422
2x8 Wildlife Cover
Advertisement
Table of Contents
Related Manuals for roost&root 34721
Summary of Contents for roost&root 34721
- Page 1 EMAIL: support@roostandroot.com re: RFB Assembly Support VOICE: 877-741-COOP | Assembly Support ext 3 Assembly Instructions Raised Vegetable Gardens Wildlife Covers These instruction cover these models... SKU 34721 SKU 34722 4x4 Wildlife Cover 4x4 Wildlife Cover These written instructions, as provided with your purchase, will...
- Page 2 Provided T-25 3" Provided Provided Ceramic Coated Wood Screws Bit Holder T-25 Bit Your Drill Provided Exterior Grade Hinge & Hasp Screws Provided #2 Phillips Bit Before You Get Started... Pan head screws are provided if you ordered a tall cover. Look For This Note Symbol Provided Safety Hasps...
- Page 3 Attach ends (with pre-drilled holes) Attach 2 hinges as shown to sides as illustrated, using brown using Phillips screws in T-25 Screws. Ends are same. pre-drilled holes. Locking Hasps On Front Hinges On Back Wire side facing inward on all panels. Top screws into pre-drilled holes.
- Page 4 Attach ends (with pre-drilled holes) Attach 4 hinges as shown to sides as illustrated, using brown using Phillips screws in T-25 Screws. Ends are same. pre-drilled holes. Locking Hasps On Front 1/16 Thick Black Plastic Spacer Between Side Panels With Brown Screws Hinges On Back Wire side facing inward...
- Page 5 Attach 4 hinges as shown using Phillips screws in Attach middle hinge pre-drilled holes. support board as shown. Hinges On Top Wire side facing inward on all panels. Locking Hasps On Outsides Attach ends Top screws into (using pre- pre-drilled holes. drilled holes) to sides as illustrated...
- Page 6 Attach 4 hinges as shown using Phillips screws in Attach middle hinge Attach middle hinge pre-drilled holes. support board support board as shown. as shown. Wire side Hinges On Top facing inward on all panels. 1/16 Thick Black Plastic Spacer Between Side Panels With Brown Screws Locking Hasps...
- Page 7 Door hinge screws on jamb side are pre-installed. Attach ends to Position door in opening and install door side front and back sides. hinge screws... 1st - put 1 screw in top hinge and tighten. 2nd- put 1 screw in bottom hinge, tighten. Attach 2 back panels together 3rd - align door in frame 4th - install all other screws.
- Page 8 Door hinge screws on jamb side are pre-installed. Attach ends to Position door in opening and install door side front and back sides. hinge screws... 1st - put 1 screw in top hinge and tighten. 2nd- put 1 screw in bottom hinge, tighten. Attach top making all 3rd - align door in frame edges and corners...
Need help?
Do you have a question about the 34721 and is the answer not in the manual?
Questions and answers