Table of Contents
Advertisement
In source menu, highlight a source by pressing
" " or " " button and switch to that mode by
pressing " " button. Source options are; TV,
EXT-1, EXT-2, EXT-2S, FAV, HDMI-1, HDMI-2,
HDMI-3, HDMI-4, YPbPr or PC-VGA.
Note: Once you have connected optional equipment
systems to your TV, you should select the required
input to view pictures from that source.
PC Mode Menu System
See "Connecting the LCD TV to a PC" section
for connecting a PC to the TV set.
For switching to PC source, press "AV" button
on your remote control and select PC input.
You can also use "Source" menu to switch to
PC mode.
Note that PC mode menu settings are available only
while the TV is in PC source.
PC Position Menu
Select the first icon by pressing " " or
" " button. PC Position menu appears on the
screen:
Autoposition
If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
This setting therefore automatically optimizes
the display.
Select Autoposition item by using " " or " "
buttons. Press OK button.
Warning: Please ensure auto adjustment is
performed with a full screen image to ensure
best results.
H (Horizontal) Position
This item shifts the image horizontally to right
hand side or left hand side of the screen.
Select H Position item by using " " or " " button.
Use " " or " " button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards the
top or bottom of the screen.
Select V Position item by using " " or " " button.
Use " " or " " button to adjust the value.
Phase
Depending on the resolution and scan frequency
that you input to the TV set, you may see a hazy
or noisy picture on the screen. In such a case
you can use this item to get a clear picture by
trial and error method.
Select Phase item by using " " or " " buttons.
Use " " or " " button to adjust the value.
Dot Clock
Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs
or text in smaller fonts.
Select Dot Clock item by using " " or " " buttons.
Use " " or " " button to adjust the value.
PC Picture Menu
For adjusting PC picture items, do the following:
Press " " or " " button to select the second icon.
PC Picture menu appears on the screen.
Brightness, Contrast, Colour and Colour
Temperature settings in this menu are identical
to settings defi ned in TV picture menu under
"Analogue TV Menu System".
Note: If you set Colour Temp as User, you can defi ne
R, G, B settings manually.
English - 25 -
Advertisement
Table of Contents
