Technical Specification - Blyss NDY-19MA-E Original Instructions Manual

Operation
Setting timer
• Up to 10 different timer settings can be programmed.
• Each timer setting has its date, power-on time and power-off time.
• The maximum duration of each timer setting is 23 hours 50 minutes.
• If the power-off time of the timer setting falls on the following day, it is unnecessary
to set the date – just set the power-off time.
1. Press the key, the timer number starts blinking (01-10).
2. Press the "+" or "-" key to select a timer number.
3. Press the key. The cursor on the left side of the day blinks.
4. Press the "▲" or "▼" key to move the cursor to the corresponding day. Press the "+"
key to add a corresponding day, or press the "-" key to delete a day.
5. Press the key to set the on time. The hour digit starts blinking.
6. Press the "+" or "-" key to set the hour.
7. Press the key. The minute digit starts blinking.
8. Press the "+" or "-" key to set the minute.
9. Press the key, to set the off time. The hour digit starts blinking.
10. Press the "+" or "-" key to set the hour.
11. Press the key. The minute digit starts blinking.
12. Press the "+" or "-" key to set the minute.
13. Press the key. The temperature digit starts blinking.
14. Press the "+" or "-" key to set the temperature.
15. Press the key to continue with the Timer setting or press the
the setting.
Viewing the timer setting
1. Press the key.
2. Press the "+" or "-" key to check the power-on time of the set timers one by one.
3. To check the power-off time, press the "▲" key.
4. Press the "+" or "-" key to check the power-off time of the set timers one by one.
5. To delete selected setting, press the "C" key.
Activation timer
Press the key to activate the timer function.
NOTE: When the timer is active, the heating level must be manually selected.
If the heater function is not selected, only the flame effect goes on at the set
power-on time.
12
NDY-19MA-E NDY-19MA-E
Automatic heating mode
Press the "IC" key to activate automatic heating mode. The "AUTO" icon appears on
the display.
When the automatic heating is turned on, the fireplace automatically activates/changes
the heating level depending on the set temperature and the ambient room temperature.

Technical specification

Model:
Rated voltage:
Rated power input: 2000 W
key to confirm
yyWxx
Model identifier(s): NDY-19MA-E
Item Symbol
Heat output
Nominal heat P
nom
output
Minimum P
min
heat output
(indicative)
Maximum P
max,c
continuous
heat output
Operation / Technical specifications
NDY-19MA-E
220 - 240 V~, 50 Hz
Class I product, must be connected to earth.
Conforms to all relevant European Directives.
For indoor use only.
Manufacturing date code; year of manufacturing (20yy) and week
of manufacturing (Wxx).
Value Unit Item
Type of heat input, for electric storage local
space heaters only (select one)
2 kW manual heat charge control, with
integrated thermostat
1 kW manual heat charge control with
room and/or outdoor temperature
feedback
2 kW electronic heat charge control with
room and/or outdoor temperature
feedback
Unit
Not
applicable
Not
applicable
Not
applicable
13