Construction Diagram
1) Remove protective plastic film!
DISCONNECT THE
PRODUCT FROM THE
MAINS BEFORE OPENING.
2) Assemble
4) Screw the table
the stand
top on the stand to
8 x Screws
secure the assembly
8 x Screws
3) Feed the
cable down
the stand
5) Secure the wire in
place using the wire
guide underneath
6) Adjust
the 4 feet
as required
Wire in place using
the wire guide
Maintenance
Plastic Table Top
• clean with a soft, damp cloth only. Do not use abra-
sives, alcohol or solvent based cleaners.
Stainless Steel Base
• clean with stainless steel cleaner
Glass Top
• clean with glass cleaner
Protect your outdoor product from the elements by
storing it in a dry location when not in use.
Changing the Lightbulb
Remove the top section of the product, and place it with
the top down. Place it on a soft surface to avoid scratching.
CAUTION!
•
DISCONNECT THE PRODUCT FROM THE
MAINS BEFORE OPENING.
• WHEN ASSEMBLING MAKE SURE THE SEAL IS
POSITIONED CORRECTLY AND THE SCREWS
ARE ATTACHED SECURELY (1 Nm).
• REPLACE DAMAGED SEALS IMMEDIATELY
MAX. 60W
Troubleshooting
If your product does not function any longer, then please first
examine if there is a problem with the power supply, if the light
bulb is blown or if you have handled the product incorrectly. If
your product is defective in any way, please contact the vendor.
Original Packaging
The device can be safely transported in the original packaging. If
insufficient protective packaging is used, the customer is liable
for any damages during transportation.
PLEASE KEEP THE ORIGINAL PACKAGING AND USE IT, IF
POSSIBLE, IN CASE OF WARRANTY OR RETURN OF THE
EQUIPMENT.
Ecology/ Disposal
4mm
Packaging materials and appliance are made from recyclable
materials. Seperation of the remaining waste materials into dif-
ferent types facilitates the recycling of valuable raw materials.
When the appliance is to be no longer used please dispose of
it in a proper manner. For more information, please contact your
local authority.
Distribution
Refer to our website for the latest information about our
products.
www.moree.de
Moree Ltd.
Kaiserswerther Markt 11
40489 Düsseldorf
Germany
Designed and produced by Moree in Germany © 2011
Design Patented. Products are subject to change.
STUDIO 36/45/75/105 OUTDOOR
Bedienungsanleitung (DE)/ Instruction Manual (EN)
Mod. Studio Outdoor 36 (16-03-01) / 45 (16-03-02) / 75 (16-03-03) / 105 (16-03-04)
Seal
8x Screws
•
Die Bedienungsanleitung vor dem ersten Gebrauch vollständig lesen und sorgfältig aufbewahren.
•
Please read the instruction manual fully, before using the product. Keep the manual for the entire
life of the product.
MADE IN GERMANY
Need help?
Do you have a question about the Studio Outdoor 36 and is the answer not in the manual?
Questions and answers