Advertisement
Quick Links
39907_ins_wireless_QuantumSlim
Overview and Identification
The BAPI-Stat "Quantum Slim" Wireless Temperature Transmitter is designed to monitor temperature inside
refrigerator and freezer cases. The unit mounts on the outside of freezer units and can be mounted either inside or
outside of refrigerator units. It is available with an internal or an external sensor.
The external sensor's ribbon cable can easily fit between the door seal or through hole with FEP cable without affecting
appliance efficiency. The temperature is then transmitted to the receiver with a measurement range of -40 to 185˚F
(-40 to 85˚C). The unit has an estimated battery life of 5 years with the default transmit rate of once every 5 minutes.
The unit has an estimated battery life of 5 years with the default transmit rate of once every 5 minutes. The transmitted
temperature is picked up by a Receiver/Gateway and supplied directly to the BAS via multiple communication options
(TCP/IP, JSON, BACnet IP). The transmitter stores all data in memory until it receives a successful reception signal
from the Receiver/Gateway, so that no data is lost during a signal interruption. Transmissions can also be triggered
by a temperature change with a user-adjustable threshold. The 902 MHz signal is "frequency agile" for maximum
reliability.
BAPI-Stat "Quantum Slim"
Fig. 1: BAPI-Stat "Quantum Slim" Room Transmitter and Hanging Bracket and Remote Sensors
Associated Gateway/Receiver
The Gateway receives the data from transmitters up to 275 feet away, and provides the data
to the BAS via multiple communication options (TCP/IP, JSON, BACnet IP). The Gateway also
sends a confirmation signal to each transmitter upon a successful reception of data, allowing
the transmitter to release the data that it has stored in memory so that no data is lost during
a signal interruption. Operation of the Gateway is described in the
instruction sheet
(39021_RCV_900_BACnet.pdf)
Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel:+1-608-735-4800 • Fax+1-608-735-4804 • E-mail:sales@bapihvac.com • Web:www.bapihvac.com
BAPI-Stat "Quantum Slim" Wireless Room
External Hanging
Thermobuffer Sensor
Specifications subject to change without notice.
Temperature Transmitter
External Remote
Probe Sensor
Gateway
Gateway/Receiver
Installation & Operations
rev. 02/07/18
Fig. 2:
1 of 4
Advertisement
Related Manuals for BAPI BAPI-Stat Quantum Slim
Summary of Contents for BAPI BAPI-Stat Quantum Slim
- Page 1 39907_ins_wireless_QuantumSlim Overview and Identification The BAPI-Stat “Quantum Slim” Wireless Temperature Transmitter is designed to monitor temperature inside refrigerator and freezer cases. The unit mounts on the outside of freezer units and can be mounted either inside or outside of refrigerator units. It is available with an internal or an external sensor.
- Page 2 6. For remote sensors, string the wire through the freezer door and place the sensor in the best location to measure the required temperature. Fig. 3: BAPI-Stat “Quantum Slim” Mounting 7. Mount the External Probe using a Flexible Probe Bracket (Fig. 4) or use the clip or screw hole on the Hanging Bracket Sensor (Fig.
- Page 3 BAPI-Stat “Quantum Slim” Wireless Room Temperature Transmitter Installation & Operations rev. 02/07/18 39907_ins_wireless_QuantumSlim Battery Replacement 1. Cover Removal: Remove the cover from the base plate by turning in the cover lockdown screw with a 1/16” Allen wrench (as described in the Mounting Section) until the cover can be removed (Fig 6).
- Page 4 FCC Wireless Certification and Interference Statement Wireless BAPI-Stat “Quantum Slim” Room Transmitter (QSL900) - FCC ID: T4FQSL900 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.