Changing The Size Of The Privacy Zone - Verbatim Store'n'Go Professional V-Safe User Manual

4.3 Changing the Size of the Privacy Zone

CAUTION! Changing the size of your Privacy Zone requires formatting your Store'n'Go Professional,
causing ALL secured and non-secured data to be lost.
To change the size of the Privacy Zone:
1. Click Format in the V-Safe Settings window. The V-Safe Format window is displayed, as shown in Figure 3 on page 6.
2. Enter the new password and confirm it by entering it a second time.
3. Enter a hint in case you forget your password.
4. Set the new size of your Privacy Zone using the slide bar.
5. Click OK. The V-Safe Format Warning window is displayed, as shown in Figure 4 on page 6.
6. Click OK to reformat your Store'n'Go Professional and create a new Privacy Zone.
To remove the Privacy Zone:
1. Follow steps 1 to 3 above.
2. Set the size of your Privacy Zone to 0% using the slide bar.
3. Click OK. A message is displayed (Figure 17) warning you that your Store'n'Go Professional will not have a Privacy Zone.
Figure 17: Removing the Privacy Zone
4. Click OK. The V-Safe Format Warning window is displayed, as shown in Figure 4 on page 6.
15