Advertisement
3.7.
Place the wooden top (n) face down on a flat, clean, smooth surface. Place the cabinet upside down on the wooden top and align it with the four
pre-drilled holes. Fix with the four hex head screws (S). Screw into place the four adjustable leg levellers (R).
3.8.
Bolt the four corner braces (I) into place using the self tapping screws (o), 16 lock washers (P), and 16 nuts (Q).
3.9.
Bolt one shelf part (K) to the underside of the cupboard compartment as indicated above using the self tapping screws (o). Tighten all fixings
and turn workbench the right way up.
3.10.
Put shelf component (K) into place at desired height inside cupboard.
Place the finished workbench in its final location and adjust the leg levellers so that the bench is both level and stable in use.
© Jack Sealey limited
Original Language Version
AP2010.V2 Issue 1 (HF) 26/06/18
Advertisement
