Summary of Contents for greenhouse sensation Solargrow
Page 1
Water & nutrients pumped from the reservoir to feed the plants Solar panel triggers the pump If you require any further assistance with your Greenhouse Sensation Hydrogrow please feel free to contact us by: Telephone: 0845 602 3774 Fax: 0845 602 3775 FREEPOST greenhouse sensation info@greenhousesensation.co.uk...
Capillary Cubes GS316 your Solargrow and raise great plants. If we’ve missed anything though do let us know. And Nutrient A & B x 1 of course do call or email us if you have any questions at all – that’s what our plantsmen are...
Page 3
Testing and adjusting pH Component page The pH of the nutrient and water mix should be between 6.2 and 7.2. To check the pH of the water and nutrient solution in the Solargrow reservoir use the Greenhouse Sensation pH test kit supplied. Reservoir Holiday Watering kit hole Take a 2ml sample of the solution in the small test tube supplied.
Perform this Reservoir Change every 4 weeks to flush our impurities and rebalance the nutrients. If you are using a ‘Holiday Watering Kit’ please use those Place a watering can or bowl next to your Solargrow. Reach for the instructions first.
Page 5
Preparing nutrients for use Charging your Solar Panel Containers A and B already contain nutrient powders. To use them in the Solargrow add When you first use your Solar Panel each season or when your battery has run low, you will need to lukewarm water to each container up to the level shown on the label.
Page 6
The red light will come on for 2 Place the pump on minutes and the water the base of the will flow through the reservoir and rest the Solargrow. emptying tube inside the reservoir at end with the level indicators.
Need help?
Do you have a question about the Solargrow and is the answer not in the manual?
Questions and answers