BMW CN1013887ID Owner's Manual page 42

• Video: Sets video format used by DVD Player. NTSC
is standard for North America and there is no need to
change this setting. (Factory default Video setting is
'Auto')
TV Shape 4:3 Pan Scan
Video Auto
Brightness Off
Edges Off
• Brightness: Set picture brightness output from DVD
Player. (Factory default Brightness setting is 'Off')
TV Shape 4:3 Pan Scan
Video Auto
Brightness Off
Edges Off
• Edges: Set picture sharpness output from DVD
Player. (Factory default Edges setting is 'Off')
TV Shape 4:3 Pan Scan
Video Auto
Brightness Off
Edges Off
DVD Operation (Advanced)
NTSC
PAL
PAL 60
Auto
Off
On
Off
Sharpen
Soften
–40–
Changing Audio settings:
The type of audio that is output to speakers for each
type of audio encoding process can be set according to
personal preferences. In '2 channel' mode, the selected
encoding is processed for two channel output. In "Off"
mode, regular stereo output is used. (Factory default
Audio settings are all '2 Channel')
Performance Note: It is recommended that
Audio settings not be changed to avoid
adversely affecting audio quality!
Use left and right DIRECTION ARROW buttons to
select AUDIO from SETUP menu, and press ENTER
(highlight indicates current selection). Use up and down
DIRECTION ARROW buttons to select one of four
choices, and press ENTER to change.
Analog Out
DOLBY Digital 2 Channel
DTS 2 Channel
MP3 2 Channel
Other 2 Channel (Reserved for
future use)
CN1013887ID