LG Signature URETC1408N Owner's Manual page 27

Assembling the Auto-lift Device
1
Remove the hole cover from the bottom of the
drawer.
2
Raise the back section of the folded cover and
rest it on the guide a at the rear of the drawer.
3
Hold the middle of the cover and lift it slightly
into the groove.
4
Make sure the hinges on the auto-lift device
are aligned with the slots in the drawer.
5
Lift the auto-lift device with both hands.
6
Insert the hinges on the auto-lift device into the
slots at the front of the drawer.
7
Lower the device into place and move it back
and forth to make sure it is engaged.
8
Use both hands to assemble the inner
compartment in the drawer.
9
Plug in the refrigerator or connect power.
OPERATION 27