TOUR PULLBACK HANDLEBAR KIT
KIT P/N 28?9586
Application
AII MYl4 Tour Motorcycles
NOTE: Before you begin, read these instructions and check to be sure all parts and t
accounted for in package.Please retain these installation instructions for future refere
parts ordering information. For your safety, and to ensure a satisfactory installation, pe
installation steps correctly in the seguence shown beiow.
Kit Contents:
Quantity
I
2
I
Part Description
Tour Pullback Handlebar
Nylon Straps
Instructions
Part Number
1 0 1 9 5 6 9
708 i 504
992436s
#2 Phillips Screwdriver
4 mm Hex Key Socket
8 mm Hex Key Socket
19 mm socket
Ratchet
Torqr:e Wrench
Side Cutters
Digital Camera (Optional)
You will need to supply:
# I Phillips Screwdriver
#T25 Torx Bit
5 mm Hex Key Socket
I0 mm socket
Dental Pick
Exterrsion
Protective Cloth
BenchVise (Optional)
Electrical Tape (Optiona1)
APPROXIMATE ASSEMBLY TIME: 90 minutes
- t -
Tour Pullback
Handlebar