Indian Motorcycle Ride Command Quick Start Manual

Indi Mot cycle Ride Comm d

QUICK START GUIDE

BUTTONS

RIDER SCREENS

1 Press to toggle between Rider Screens.
2 To customize your rider screens, press
3 Press icon on motorcycle display screen to save and return.

AUDIO

1 Press to access Audio Section.
To select audio source, press
2
inside of circle
FM
DISPLAY ON/OFF SCREEN
1 Press once to display INDIAN
2
HOLD for 3 seconds to turn off display (audio remains on). Press for 5 seconds to turn off display and mute audio.
Press any button to turn on display.
3
BLUETOOTH SMARTPHONE PAIRING
1 Press to access Bluetooth Section on the display.
You must enable Bluetooth on your phone and make it visible to complete this process.
NOTE
2 To pair phone, enable Bluetooth on your phone, make phone visible, and press
Press OK, and select your phone on motorcycle display screen.
3
Agree to all notifications on your phone.
4
While accepting notifications, remember to select the "Do Not Show Again" box (if applicable).
NOTE
NAVIGATION
Press to access Navigation Section.
1
Press on screen to re-center map, or change map view.
2
3 Press on screen to enter address, search for point of interest, and access favorites.
4 While in an active route, press
®
icon on motorcycle display screen and select among available options.
again , or select the red circle icon in upper left corner. Current source is shown
.
logo Screen.
®
for navigation volume options.
™
icon.
9928702 Rev 1