Broadcast Tools AT-1616L Installation And Operation Manual

Universal serial i/o controller

Advertisement

Quick Links

®
Installation and Operation Manual
AT-1616L Universal Serial I/O Controller
Manual update 9/09/05
Due to the dynamic nature of product design, the information contained in this
document is subject to change without notice. Broadcast Tools, Inc., assumes no
responsibility for errors and/or omissions contained in this document. Revisions
of this information or new editions may be issued to incorporate such changes.
Broadcast Tools® is a registered trademark of Broadcast Tools, Inc.
Copyright, 1989 - 2005 by Broadcast Tools, Inc. All rights reserved.
No part of this document may be reproduced or distributed without permission.
Visit www.broadcasttools.com for important product update information.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AT-1616L and is the answer not in the manual?

Questions and answers

Summary of Contents for Broadcast Tools AT-1616L

  • Page 1 Manual update 9/09/05 Due to the dynamic nature of product design, the information contained in this document is subject to change without notice. Broadcast Tools, Inc., assumes no responsibility for errors and/or omissions contained in this document. Revisions of this information or new editions may be issued to incorporate such changes.
  • Page 2: Safety Information

    AT-1616L Installation and Operation Manual INTRODUCTION CAUTION! Thank you for your purchase of a Broadcast Tools, Inc., AT-1616L Universal Serial I/O Controller. We're confident that this product will give you many Broadcast Tools® years of dependable service. This manual is intended to give you all the infor- Products, as with any mation needed to install and operate the unit.
  • Page 3 The AT-1616L is equipped with both a RS-232 and RS-485 serial port at baud rate from 600 to 115k and allowing up to 32 - AT-1616L’s to be con- trolled over a single twisted pair cable 4000 feet from the host computer in the RS- 485 mode.
  • Page 4: Visit Our Web Site For Product Updates And Additional Information

    AT-1616L Installation and Operation Manual Input and Output Pin-outs 1 - Input 1 + 33 - Relay 1 N.O. 2 - Input 1 - 34 - Relay 1 Com 3 - Input 2 + 35 - Relay 1 N.C. 4 - Input 2 - 36 - Relay 2 N.O.
  • Page 5: Limited Warranty

    If Broadcast Tools is notified, in writing, of a failure of any item manufactured by Broadcast Tools to conform to the foregoing Limited Warranty within one (1) year following the date of the Buyer’s acquisition of the item, and if the item is returned in to Broadcast Tools in accordance with Broadcast Tools’...
  • Page 6 AT-1616L Installation and Operation Manual e-mail: support@broadcasttools.com voice: 360.854.9559 fax: 866.783.1742...
  • Page 7 AT-1616L Installation and Operation Manual e-mail: support@broadcasttools.com voice: 360.854.9559 fax: 866.783.1742...
  • Page 8 AT-1616L Installation and Operation Manual e-mail: support@broadcasttools.com voice: 360.854.9559 fax: 866.783.1742...
  • Page 9 AT-1616L Installation and Operation Manual e-mail: support@broadcasttools.com voice: 360.854.9559 fax: 866.783.1742...

Table of Contents