Subscribe to Our Youtube Channel
Related Manuals for Lenoxx GLA45
Summary of Contents for Lenoxx GLA45
- Page 1 LICENSED MERCEDES RIDE-ON CAR Model: GLA45 Batch: PR3831 Please read and retain these instructions for future reference.
-
Page 2: Safety Information And Warnings
The illustrations used in this manual are to illustrate the operation method and product structure of the product. Where there is a small difference between the physical item and the illustrations, please take the physical as the standard. SAFETY INFORMATION AND WARNINGS: 1. -
Page 3: Connecting The Battery
CONNECTING THE BATTERY: ● The battery will need to be connected as a step in the assembly process, before charging and before use of the ride-on. ● Remove the black plastic protective cover. ● Connect the red wire from the ride-on body onto the red terminal of the battery. Also ensure the black wire is connected onto the black terminal of the battery. -
Page 4: Parts Diagram
PARTS DIAGRAM:... -
Page 5: Parts List
PARTS LIST: Item Name Picture Qty. Seat Mirror Windshield steering wheel Ride-on body Wheels Wheels cover motors M10 nut M5*35 Round screw Ø4*20 self-tapping screw axle sleeve Gasket Charger Manual... -
Page 6: Wheel Cover
ASSEMBLY STEPS: 1. RIDE‐ON BODY 2. MOTOR/MOTORS 3. AXEL SLEEVE 4. WHEEL 5. GASKET 6. NUT 7. WHEEL COVER 8. MIRROR 9. SEAT 10. WINDSHIELD 11. M10 NUT. M5*35 ROUND SCREW 12. STEERING WHEEL... - Page 7 Warning: Assembly of the ride-on must be completed by an adult. To avoid suffocation or choking, keep all bags and small parts away from babies and children. 1 x screwdriver is required for assembly. Screwdriver is not included. 2 x socket wrench are included. Driving wheel installation: ●Turn the ride‐on upside down as shown in the image above.
- Page 8 ●Push the wheel to the front axle. ●Put an axle sleeve and a gasket, then tighten them with a nut. ● Insert the wheel cover. ●The other wheel is to be installed in the same way. Steering wheel installation: ●Connect the terminal of the steering wheel to terminal of the instrument panel, put some of the wire back inside instrument panel if it is too long.
- Page 9 Windshield installation: ●Look at the slots and press the windshield into the slots accordingly. Seat installation: ● Put the seat onto the ride‐on body according to the above picture, ensuring the seat marrys up wo the slots on the ride‐on’s body. Attach the seat with using Ø4*20 self‐...
- Page 10 Dashboard: 1. Player: with USB, MP3, TF card Jack, power quantity display. 2. Light switch: Turn on or off the light. 3. Power button: press to turn the power on or off. 4. Forward/backward switch: Operate it together with the accelerator to make the ride‐on to go forward or backward. Towing handle: When the ride‐on’s battery is flat, you can pull it home, by using the handle under the ride‐on.
-
Page 11: Operation
OPERATION: After assembly and charging: Ensure the charger is removed from the charging socket on the ride-on. Press the power switch to turn the ride-on on. Put the ride-on into forward or backward mode by pushing the forward/stop/backward switch to either forward or backwards. -
Page 12: Wiring Diagram
WIRING DIAGRAM:...
Need help?
Do you have a question about the GLA45 and is the answer not in the manual?
Questions and answers