Rize rx Owner's Manual
  1. Manuals
  2. Brands
  3. Rize Manuals
  4. Bicycle
  5. rx
  6. Owner's manual

Rize rx Owner's Manual

Hide thumbs Also See for rx:
Table of Contents

Advertisement

Quick Links



Owner's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the rx and is the answer not in the manual?

Questions and answers

Related Manuals for Rize rx

Summary of Contents for Rize rx

  • Page 1 
 Owner’s Manual...

  • Page 2: Table Of Contents

    Contents Welcome …………….…………………………………………………………………………………… Safety Check …………….…………………………………………………………………………………… 2
 Maintenance …………….…………………………………………………………………………………… Assembly …………….…………………………………………………………………………………… Battery Charging …………….…………………………………………….……………………………………… 7 Headlight and Taillight …………….…………………………………………………………………………………… Walk Assistance Mode …………….…………………………………………………………………………………… LCD Screen …………….…………………………………………………………………………………… Display Settings …………….…………………………………………………………………………………… 10 Error Code Definition …………….…………………………………………………………………………………… 11 Drivetrain …………….…………………………………………………………………………………… 11 Cleaning and Tips …………….……………………………………………………………………………………...

  • Page 3: Welcome

    If you don’t feel comfortable assembling the bike on your own, it is highly recommended that you have your bike assembled by a bicycle mechanic. If you have questions regarding assembly or any other questions, please refer to the Rize Bikes Help Center or contact us directly.

  • Page 4: Safety Check

    Safety Check Before First Use Please check the following components: handlebar, stem, pedals, crank, wheels. Ensure they are properly installed and tightened. While some of the components are pre-assembled, it is still important to make sure every component is tightened at the indicated torque value. Failing to notice a loose component may cause it to detach during use and lead to serious injury.

  • Page 5: Maintenance

    There are risks associated with the use of any bike over time which cannot be predicted or avoided and are the sole responsibility of the rider. You are responsible for your own actions while using an electric bike. Rize Bikes is not responsible nor liable for any accidents or injuries (whether caused by you or others) that may occur during your use.

  • Page 6: Assembly

    Assembly (A) Handlebar (required tools: 5mm hex key) Do not carry the bike or move the fork during the handlebar assembly process. The fork must be fully inserted into the 2. Tighten 1. Remove silver frame. spacers 1. Remove the silver spacer from the head tube. 2.
  • Page 7 (D) Tire Pressure Inflate the tires to 30 PSI. Recommended tire pressure is indicated on the tire sidewall. Do not over-inflate or under-inflate tires. (E) Pedals (Required tools: 15mm wrench, recommended torque 35-40 N.m.) The right and left pedals are marked with an "R" or "L" on the end of the thread. The right pedal axle has a smooth surface whereas the left pedal axle has grooves.
...
  • Page 8 (G) Seat 1. Open the seat tube lever, insert the seat post, and close the lever to lock. 2. Rotate the lever to adjust the lock tightness. 3. Adjust the seat angle by loosening the two screws on each side of the rail holder. You can tilt the seat up or down and move forward or backward to fit your comfort.

  • Page 9: Battery Charging

    Battery Charging Ensure the battery is fully charged before your first ride. The charger will show a red light indicating that the battery is charging. Once fully charged the light will turn green. Remove the charger from the battery within one hour after it has been completely charged. The charger will automatically stop charging when the battery is full, however, unnecessary damage to the charging components could occur if the charger is left attached to the battery and power source.

  • Page 10: Headlight And Taillight

    Switching the Power ON/OFF 1. Press and hold the power button for one second. The LCD display will turn on and the bike is ready to start. 2. To switch off, press and hold the power button for one second. Power Assist Level The level of assist determines the motor’s input while pedalling.

  • Page 11: Lcd Screen

    LCD Screen
...

  • Page 12: Display Settings

    Data Mode Display Press and hold the “i” button to change the data mode display. Press again to change to the next mode. The sequence: Single Trip Distance > Total Distance > Maximum Speed > Average Speed > Remaining Distance > Energy Consumption (Calories) >...

  • Page 13: Error Code Definition

    Error Code Definition Whenever an error is detected, the LCD display shows the sign with an error code. Error codes range from 04 to 30: Error 04: Throttle fault Error 05: Throttle fault Error 07: Over-voltage protection Error 08: Motor hall signal cable fault Error 09: Motor phase cable fault Error 11: Controller temperature sensor fault Error 12: Current sensor fault...

  • Page 14: Cleaning And Tips

    Cleaning: Clean your bike after a wet ride and store in a dry place to avoid rust and corrosion. • Always remove the battery when cleaning or servicing your bike.  • Clean the battery and the battery housing with a slightly damp rag if necessary. Do not spray with water as this may •...

  • Page 15: Serial Number

    Serial Number It is important to keep a record of your serial number as this will be required by the police in case of theft. Rize Bikes does not keep any records of the serial numbers of bikes sold. It is your sole responsibility to take note of the serial number upon receiving your bike.

  • Page 16: Help Center

    If you have any other questions please refer to the Rize Bikes Help Center or contact us. Help Center: www.rizebikes.com/help Email: support@rizebikes.com Thank you for choosing Rize Bikes!
...

This manual is also suitable for:

Blade

Table of Contents