Summary of Contents for Aeon Labs Z-Stick 2 Series
Page 1
Aeon Labs Z-Stick Series 2 (Z-Wave USB Adapter)
Page 2
Change history Revision Date Change Description 05/08/2013 Initial draft.
Page 3
Engineering Specifications and Advanced Functions for Developers (V3.07) The Aeon Labs Z-Stick S2 (Series 2) is a self-powered Z-Wave USB adapter with remote network creation capabilities (independent from external power and host microprocessor). By being able to remotely include/remove Z-Wave devices, this greatly simplifies Z-Wave network installation. When connected to a host controller (via USB), it enables the host controller to take part in the Z-Wave Network.
Page 4
4. Independence Mode and SerialAPI-Mode Functions Independence Mode function of Z-Wave Button Button action Description Clicked Adding/Including Z-Wave Device into the Z-Wave network: 1. Unplug the Z-Stick from the USB connector and then tap the button. (The LED will blink slowly.) 2.
Need help?
Do you have a question about the Z-Stick 2 Series and is the answer not in the manual?
Questions and answers