BMW AG Owner's Handbook Manual page 80

Dynamic Stability Control DSC
80
Deactivating DSC and DTC
Press and hold down the DSC button
until the telltale light and the yellow
brake warning light come on, but do not
wait more than 10 seconds before
releasing the button.
Under these circumstances no stability-
or traction-improving manipulation of
engine or brakes takes place.
In order to maintain maximum
driving stability, you should drive
with the DSC system activated when-
ever possible.<
Reactivating DSC
Briefly press the button a second time;
the telltale light or lights go out. DTC is
deactivated.
Not even DSC can overcome the
laws of physics. The driver is
always responsible for matching his or
her style of driving to the prevailing
conditions. Avoid taking any risks on
account of the additional safety
afforded by this system.
When DTC is in ready mode DSC is
deactivated and DTC contributes to a
limited extent to stabilising the car.
Make no modifications to the DSC sys-
tem. All work on the DSC should be
entrusted only to skilled, authorised
personnel.<
Online Edition for Part-No. 01 41 0 158 017 - © 03/04 BMW AG