BMW AG Owner's Handbook Manual page 144

Lights and bulbs
144
2. Push the trim down out of the way,
see arrow 1, release the bulb holder,
see arrow 2, and remove
3. Press the bulb in slightly, turn it to
the left, take it out and insert the new
bulb
4. Press the bulb holder back into place
until it is heard to engage
5. Reattach the trim with the clips.
Centre brake light
This is an LED strip at the rear window.
In the event of a defect, consult BMW
Service or a workshop employing
trained personnel and working to the
specifications issued by BMW.
Licence plate lights
5 watt bulb
1. Insert a screwdriver blade into the
cutout and press to the left; this will
release the light glass
2. Change the bulb.
Light-emitting diodes LEDs
Controls, displays and other equipment
items inside your car have light-emitting
diodes behind a cover as their light
source. These LEDs are similar to con-
ventional lasers and are classified by
law as 'Class 1 light-emitting diodes'.
Online Edition for Part-No. 01 41 0 158 017 - © 03/04 BMW AG