SereneLife SLSFE11 User Manual

Portable electronic safe box

SLSFE11

Portable Electronic Safe Box

INSTRUCTIONS

1. TO PROGRAM AND CHANGE

THE USER CODE

First, open the door of your safe,

without turning the rotary knob before

you start to program your safe.

Remove the battery compartment cover on the back of the door and

place the batteries (4x1.5 batteries type AA) into the battery holder

correctly. (Batteries included inside the safe).

While the door is open, press the button behind the door. The yellow

light will be on with a short beep. Please input the user code (from 3-8

digits) using any number from "0" to "9" within 30 seconds, then press "E"

to con rm it.

To change the user code, please use the same procedures as above.

Input the user code you programmed, then press "E". The green light will

be on. Please turn the knob within 5 seconds and pull out to open the

safe. If a wrong digit is input, you can press "C" to cancel it.

Note: With each press the yellow light will ash with a short beep,

indicating that the micro processor con rmed it. If the yellow light keeps on

ashing with the beep, it means the code is wrong. Inputting the wrong

code three times will result in the micro processor refusing to accept the

input for 20 seconds. If you press the wrong code three times again, the

micro processor will refuse to accept input for 5 minutes.

Close the door and turn the knob counter-clockwise to lock the safe.

www.SereneLifeHome.com

Table of Contents

Need help?

Do you have a question about the SLSFE11 and is the answer not in the manual?

Page 1 SLSFE11 Portable Electronic Safe Box INSTRUCTIONS 1. TO PROGRAM AND CHANGE THE USER CODE First, open the door of your safe, without turning the rotary knob before you start to program your safe. Remove the battery compartment cover on the back of the door and place the batteries (4x1.5 batteries type AA) into the battery holder...
Page 2 4. HOW TO USE YOUR OVERRIDE KEYS For your convenience, we have engineered a manual override system for your safe. We have supplied 2 override keys. These keys allow you to open the safe at all times, even when the batteries are run down or when you have forgotten your code.