Installing With Base With Vehicle Seat Belt - Graco SNUGRIDE 35 LITE LX Instruction Manual

3-C Installing With Base With
Vehicle Seat Belt
See section 6-D for additional vehicle seat belt
installation information
1. Store Lower
Anchor Attachment
Connectors
Attach the Lower
anchor attachment
connectors to the
plastic bars on sides
of base as shown.
Remove the slack.
2. Place Base in
Back Seat of the
Vehicle
Place the base flat on
the vehicle seat. Push
it back until the front of
the base touches the
vehicle seat back.
Note: Make sure base
is a minimum of 80%
on vehicle seat.
33