HYCON HFD Operating Manual

Oil flow divider

Hide thumbs

Table Of Contents

Prior to Operation

We thank you for

choosing a HYCON oil

flow divider.

We recommend you to

study this operating

manual carefully and

pay special attention to

the chapter about

Safety Precautions

We hope you will be

satisfied with your new

HYCON oil flow divider.

Best regards

HYCON A/S

HFD

Oil Flow Divider

From serial number 0750

Revised February 2005

HYCON A/S

Juelstrupparken 11

DK-9530 Støvring

Denmark

Tel: +45 9647 5200

Fax: +45 9647 5201

Mail

hycon@hycon.dk

www.hycon.dk

Table of Contents

Need help?

Do you have a question about the HFD and is the answer not in the manual?

Questions and answers

Summary of Contents for HYCON HFD

Page 1 Prior to Operation We thank you for Oil Flow Divider choosing a HYCON oil flow divider. From serial number 0750 We recommend you to study this operating Revised February 2005 manual carefully and pay special attention to the chapter about...
Page 2 Contents Page Safety Precautions ..................... 2 Technical Data ....................3 Connection......................4 Service and Maintenance ..................5 Oil Types ......................5 Warranty Terms ....................6 Spare Parts List ....................7...
Page 3 IMPORTANT GTIGT  Always use hoses, couplings and spares as such recommend by HYCON A/S.  Repairs may only be carried out by experienced personnel.  Make sure that all couplings are cleaned before connection.
Page 4 Technical Data Pressure relief valve Max. 240 bar (power source) Oil flow (power source) Max. 80 l.p.m. in Pressure relief valve 160 bar Oil flow out 20,30 or 40 l.p.m. The oil flow is regulated by interchangeable nozzles Standard is 20 l.p.m.
Page 5 The oil flow divider can be connected to various power sources, like excavators, trucks, loaders, tractors etc. The oil flow divider reduces the flow from these machines so that they can be used as power source for the HYCON hydraulic tools, e.g. breakers.
Page 6 Weekly Yearly Check couplings and clean carefully Check hoses Oil Types HYCON tools use standard hydraulic oil, i.e. all types of mineral oil and biodegradable oil, which comply with the following values: Recommended viscosity 20-40 cSt Permitted viscosity 15-1000 cSt Viscosity index Min.
Page 7 Warranty Terms We grant 12 months warranty from the first date of operation – however, not more than 18 months from the date of delivery. The warranty applies to faults that can be related to construction and production errors. Faults caused by incorrect operation, incorrect handling, lack of maintenance or the like, will not be accepted as warranty.

HYCON HFD Operating Manual

Table of Contents

Need help?

Questions and answers

Related Manuals for HYCON HFD

Summary of Contents for HYCON HFD

Table of Contents