Detailed Cell Initiated Test Actions - Motorola R2008C Operator's Manual

APPENDIX C DETAILED CELL INITIATED TEST ACTIONS
The following describes in more detail what goes on in a typical cell
initiated sequence test. It includes internal functions to the
cellular telephone. This is only a brief summary. Refer to the AMPS
specification for a more detailed description and to find the
definitions of various acronyms used.
R2008
Enter initial parameters through
the initial parameters screen of
the tone memory mode.
SYSTEM ID
MOBILE ID
FOCC
FVC #1 TO #4
Enter cell initiated sequence
test screen. The R2008C starts to
send a continuous stream of
system parameter overhead
messages.
43
MOBILE
Power up mobile. Mobile performs
DC power up task.
Mobile performs initialization task
A. Scan control channels.
B. Tune to R2008C FOCC.
C. Acquire word sync.
D. Receive overhead messages.
E. Update overhead information.
Perform paging channel selection
task.
A.
B.
Scan paging channels.
Tune to R2008C FOCC,
C. Acquire word sync.
D. Receive overhead message.
E. Perform overhead message
processing task.
Enter idle task examine
data for:
A. Paging match.
B. User request.
C. Order.
D. Overhead message.
68-81069A70-0
DEXYTa