Assembly; Before Putting Up - Delta PARTY TENT 20’x20’ PE Instructions Manual

3+ individual recommended for assembly, approximate time 2 to 3 hours

Before putting up

Please use gloves when assembling the metal frame portion of this unit. The metal components of this
product have been treated with a rust preventive coating that may feel oily to the touch. This coating is not
dangerous, but may dirty your hands during assembly. We recommend that you wipe metal parts clean with
a mixture of warm water and dish detergent prior to assembly. Should your hands become dirty, simply
wash with soap and water.
Pay attention to the following points when choosing a location:

The pavilion must stand on a flat, non-slip and safe place

choose a sheltered location

Avoid damage to the material, please place the pavilion so that it cannot rub or chafe on
branches, parts of buildings etc.

Put up the pavilion at a safe distance to fireplaces and pay attention to the direction of the wind

Leave your pavilion to dry in an erected position before packing it away.
Step1. Assembly is easiest if you layout all parts on the ground as shown
Choose a calm day to set up your tent.
PARTY TENT ASSEMBLY
.