Page 2
1. Introduction The Model SC-3 Sugarcane juicer is unlike any traditional commercial juicer. The SC-3 has removable rollers and juice compartments for easy cleaning. Additionally, it is a one-pass unit that offers better yield because of the gap between the rollers. Made with heavy-duty stainless steel, this machine will run at top performance for years to come.
Page 3
2. Diagram of Main Parts Description of Main Parts Part No. Description Part No. Description SC-1 (A) Power Light (infix type) SC-9 Safety Switch (110v) SC-2 (L) Power Switch (On/Off, 25 amp) SC-10 (A) Screw (cap nut M6) SC-3 Top Body of Machine SC-15 Washer for Roller SC-4...
Page 4
Part No. Description Part No. Description SC-8 (A) Safety Switch Stick (shorter M12) SC-54 Filter SC-8 (B) Safety Switch Stick (shorter M5) SC-55 Lexan Door SC-55 (A) Silicone Seal for Cabin SC-60 100mm Legs SC-56 Adjust Legs (750-105mm) SC-61 Handles SC-57 New Tool (8-10#, 14-17# wrenches SC-62...
Page 5
5. Operating Steps Preparations • o Place the machine on the table/counter after it is taken out of the box. Make sure that no parts are missing. Connect the power plug (4) into a standard 15amp electrical outlet, (make sure the connected outlet is grounded), then turn on the power switch (2) into forward position.
Need help?
Do you have a question about the JUICERNET SC-3 and is the answer not in the manual?
Questions and answers