It’s Exciting Lighting IEL-AMB Series Manual

Battery powered horizontal wall sconce

Advertisement

Battery Powered
Horizontal Wall Sconce
Contents
• A - LED Back Plate x 1
• B - Glass Shade* x 1
• C - Remote Control x 1
* Shape/Style of Shade may vary
Front of Back Plate
Mounting Posts
Hanging Groove
On/Off Button

INSTALLATION

1. Remove rear battery cover and place 3 x D cell batteries (sold separately) with the polarity as shown
in the battery compartment. We recommend alkaline or rechargeable batteries. Replace Cover.
IMPORTANT: pay careful attention to the polarity of the batteries and ensure they are inserted in the correct
direction as shown on the battery cover illustration. Failure to install batteries in the correct direction may cause
damage to the product.
2. Determine where the product is to be mounted and insert nail or screw (not provided) into the wall.
Mount back plate on wall by sliding hanging groove over inserted nail or screw.
3. Slide glass shade mounting holes onto LED Back Plate mounting posts to hold in place.

USE

1. Push button located on the bottom of the back plate unit to power on. Push the button a second
time to power off.
2. This unit includes a remote control which can be used to turn the unit on/off or adjust the brightness
(25%, 50%, 75%, 100%) when the unit On/Off switch on the unit is turn ON. If the unit On/Off switch
on the LED Back Plate is set to OFF, the remote control will not work.The remote control is powered by
1 x CR2025 Button Cell Battery (included).

INSTALLING AND REPLACING BATTERIES:

1. Slide shade off of LED Back Plate over mounting posts and set aside.
2. Remove back plate from wall.
3. Remove rear battery cover, remove old batteries and replace with new batteries. Replace battery cover. Dispose of
used batteries as instructed.
4. Replace back plate on wall and slide shade onto mounting posts to hold into place.
It's Exciting Lighting is a Smart Living Home & Garden brand
Telephone: + 1 813 343 5775
Email: customerservice@smartlivinghg.com
Web: www.itsexcitinglighting.com
Back of Back Plate
A
Battery Cover
Requires
• D Batteries x 3
(Not Included)
Back of Shade
Mounting Holes
© 2016.2
B
C
Smart Living Home & Garden

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IEL-AMB Series and is the answer not in the manual?

Questions and answers

Summary of Contents for It’s Exciting Lighting IEL-AMB Series

  • Page 1 Battery Powered Horizontal Wall Sconce Contents Requires • A - LED Back Plate x 1 • D Batteries x 3 • B - Glass Shade* x 1 (Not Included) • C - Remote Control x 1 * Shape/Style of Shade may vary Front of Back Plate Back of Back Plate Back of Shade...
  • Page 2 Glass Sconce with LED Horizontal Back Plate SAFETY: 1. This light is intended for indoor use only. Keep away from moisture and direct sunlight. 2. Do not disassemble the unit. 3. Do not mix batteries. To prevent equipment damage, and possible injury, never mix batteries with different chemistries or voltages in the equipment at the same time.

Table of Contents