Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Revo SR-1000B
Summary of Contents for Revo SR-1000B
- Page 1 SR-1000B Video Shoulder Support Rig...
- Page 2 Thank you for choosing Revo and congratulations on your purchase of the Revo SR-1000B Video Shoulder Support Rig The Revo Video Shoulder Support Rig is a compact camera stabilization rig that uses a comfortable foam padded shoulder pad mount and a hand grip to help you support your camera and keep it steady when shooting video.
- Page 3 Install the shoulder pad mounting plate on to the shoulder pad using the two included Allen screws and the included Allen wrench. If the SR-1000B will be on the right shoulder, place the plate so that the long part of the plate extends to the right of the screws. If the left shoulder will be holding the support, the long part of the plate should extend to the left of the screws.
- Page 4 Mount the hand grip to the shoulder mount frame by screwing the end of the hand grip into the hole provided at the end of the camera baseplate. Align the hand grip correctly to the hole, which is angled slightly. Tighten the hand grip securely.
- Page 5 Adjust the distance of the camera from your eye by loosening the baseplate mounting screw slightly and sliding the camera forward or back to the desired position. Tighten screw securely. overtighten. To adjust the vertical position of the camera, loosen the shoulder mount frame mounting plate screw and slide the shoulder mount frame up or down to the desired position.
- Page 6 All photos are for illustrative purposes only. • One-year Limited Warranty This Revo product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
Need help?
Do you have a question about the SR-1000B and is the answer not in the manual?
Questions and answers