Machine Operation Explain - PROMARKS TM-1500 Operation Manual

7.MACHINE OPERATION EXPLAIN.

Check the right power source with the name plate of the machine. Plug in the power and ready to operate the machine.
Turn on main power switch and set the value on control panel. After finish all of the setting push down the safety bar
and press "Start/Pause" button to start the function. Safety function will be effective and machine will stop at the
same time while user pull up the safety bar or gear motor box during working process.
After vacuum tumbling job finish, machine will stop and air ventilation at the same time. As soon as machine finish air
ventilation, open the vacuum cover and use unloading switch to unload the product in drum.
The stopper on the side of the machine is design to hold the drum and remain it in the same angle and help user to load in
the processing product.
How to use the stopper: A. Push in the handle bar of stopper to the hole of the drum before load in the processing
product.
B. Pull back the handle bar of stopper from the hole of the drum before start the machine.
Warning: The handle bar of the stopper must be pulled back before user start the machine!! The machine will be
damaged if user have not fulfill it!!
7