Using A Direct Connection; Configuring The Server; Launching The Configuration Utility - VBrick Systems VOD-W Server VBrick v4.2.3 Admin Manual

Using a Direct Connection

You can access the three utilities described above by connecting a standard monitor to the
VGA port on the VOD-W server.
To launch the utilities using a direct connection
1. Connect a monitor to the VGA port on the VOD-W server.
2. To launch the monitor utility, go to
Monitor QVOD Server
3. To launch the configuration utility, go to
4. To launch the ingestion utility, go to
Ingest Content

Configuring the Server

This section is provided as an overview of the
is up and running you will seldom need to make configuration changes. However in the event
that you do need to make a change, you must reboot the server before the changes are
applied.

Launching the Configuration Utility

Note All changes to the
changes to the Storage Path) require a reboot before the changes are applied. To
reboot, go to
To launch the server configuration utility
1. Go to
Start > Control Panel > InfoValue Quick Video
Streaming IP
18
Start > All Programs > QuickVideo OnDemand Server >
.
Start > All Programs > QuickVideo OnDemand Server >
.
page on the Configuration Utility (including, for example,
QVOD
Start > Shutdown > Restart
IP address of the Content Server. Use the drop down menu to select
the appropriate IP address or use
Start > Control Panel > InfoValue Quick Video
Product Configuration
.
.
.
Auto
.
utility. Once the server
© 2008 VBrick Systems, Inc.